Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks over 7.5 t › Gaz › 66-05-4X4/3300

Gaz 66-05-4X4/3300

Built: 1977 · Series: Other models

More machines from model year 1977

The photo shows the GAZ-AAA from the same series. Source: https://en.wikipedia.org/wiki/GAZ-AAA

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Gaz builds this truck. According to the available register data, the vehicle dates from 1977. Dimensions: 5,900 mm long and 2,260 mm wide. Its kerb weight comes to 4,235 kg. Fully loaded, it may not exceed 7,000 kg. The engine delivers 66 kW, with a displacement of 3,970 cm³. According to the Finnish vehicle register, one example of this model is on record. The gearbox has 5 gears.

GAZ – other models: the collective page of Soviet and Russian trucks outside the named ranges, from the GAZ-AA and GAZ-51 through the GAZ-53 and GAZ-66 to the GAZ-3307, 14.7 to 97 kW, 3.4 to 6.2 litres displacement

This page gathers GAZ trucks the register could not assign to a named range, from the early GAZ-AA and GAZ-MM – licence-built versions of the Ford Model AA from the 1930s – through the post-war classics GAZ-51 (from 1946) and GAZ-53 (from 1961) to the off-road four-wheel-drive GAZ-66 (from 1964) and the more modern GAZ-3307 (from 1989). GAZ, the Gorky Automobile Plant in Nizhny Novgorod, was founded in 1932 with American assistance and was for decades one of the most important truck and car makers in the Soviet Union. Some model names come from the Finnish vehicle register and there denote, with terms such as Avolavakuorma-auto (open flatbed truck) or Muut erikoiskäyttöön tarkoitetut ajoneuvot (other special-purpose vehicles), the body type, supplemented with the engine displacement in cubic centimetres.

Read on 3 more paragraphs

The register lists here 32 versions with 14.7 to 97 kW from four- to eight-cylinder engines of 3,363 to 6,200 cm³. Unladen weights range from 1,750 to 4,660 kg, gross vehicle weights from 5,075 to 8,800 kg, lengths from 3,404 to 6,550 mm and widths from 1,676 to 2,450 mm.

GAZ trucks, as rugged, easily serviced commercial vehicles, shaped road transport in the Soviet Union and its successor states and were exported in large numbers to Scandinavia and Eastern Europe as well, or brought in there as used vehicles; the GAZ-66 stayed in military and civilian service for a long time thanks to its off-road capability.

When buying used vehicles of these model years, what counts above all is corrosion on the frame, bed and cab, the condition of the often simple carburettor inline engines, brakes and steering without modern power assistance, and, on the four-wheel-drive models, the transfer case and axle seals; parts for the widely built series are available through specialist Eastern European traders, though harder to find for rarer variants.

Sources: Kennwerte der Modelle Gaz (weitere Modelle), Traficom (Finnland)

Technical data

Engine

Power66 kWcorrect
Displacement3,970 cm³correct

Dimensions and weights

Length5,900 mmcorrect
Width2,260 mmcorrect
Unladen weight4,235 kgcorrect
Gross vehicle weight7,000 kgcorrect

Drivetrain and chassis

Gears5correct

Where this model stands

Power-to-weight ratio: 15.6 kW/t (66 kW / 4.2 t)

Stronger than 1% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Gaz 66-05-4X4/3300 have?

The Gaz 66-05-4X4/3300 delivers 66 kW.

How much does the Gaz 66-05-4X4/3300 weigh?

The unladen weight is 4,235 kg.

What is the gross vehicle weight of the Gaz 66-05-4X4/3300?

7,000 kg.

What engine does the Gaz 66-05-4X4/3300 have?

3,970 cm³ displacement.

What are the dimensions of the Gaz 66-05-4X4/3300?

5,900 mm × 2,260 mm.

When was the Gaz 66-05-4X4/3300 built?

Production years: 1977.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare