Bmw iX xDrive40 – specifications
Built: 2022–2023 · Series: Other models
Data for the version built 2022–2023 · Data origin: Official register · sources
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
BMW – other models under van registration: 3 and 5 Series from the 116d to 8-cylinder M models, 85 to 408 kW, 1.5 to 4.8-litre displacement, as an estate under commercial N1 registration
This page gathers BMW models that appear in the register under the van category rather than among passenger cars. The reason is Dutch registration practice, where estate and Touring models with the rear bench removed can be registered as a light commercial vehicle of class N1 ('grijs kenteken'); the vehicles themselves are ordinary BMW 3 and 5 Series saloons and estates, not purpose-built vans. The type plates follow the familiar BMW logic: the first two digits name the series (316 to 335, 518 to 535), d stands for diesel, xDrive for all-wheel drive, Touring for the estate.
Read on 3 more paragraphs
The register lists 178 versions here with engines from 85 to 408 kW from 1,499 to 4,800 cm³ displacement with 3 to 8 cylinders, kerb weights from 1,090 to 2,585 kg and gross weights from 1,390 to 4,035 kg.
The span from small three-cylinder diesels to eight-cylinder models shows that practically the whole 3 and 5 Series line-up of the respective model years ran under this registration type once the interior was converted into pure load space.
On used vehicles of this kind, as on any used 3 or 5 Series, what counts is the timing chain or belt, turbocharger and injectors of the diesel engines, suspension bushes and brakes, and – when used commercially – the condition of the load floor and bulkhead; spare parts run through the regular BMW network and the independent parts trade.
Sources: SpecCodex register, model data: BMW (weitere Modelle, Transporter-Zulassung), BMW (manufacturer)
Technical data
Dimensions and weights
| Length | 4,953 mmcorrect |
|---|---|
| Width | 1,967 mmcorrect |
| Unladen weight | 2,440 kg (example vehicle as registered, incl. body – not a model value)correct |
| Gross vehicle weight | 3,010 kgcorrect |
Drivetrain and chassis
| Gears | 1correct |
|---|
Frequently asked questions
What is the gross vehicle weight of the Bmw iX xDrive40?
3,010 kg.
What are the dimensions of the Bmw iX xDrive40?
4,953 mm × 1,967 mm.
When was the Bmw iX xDrive40 built?
Production years: 2022–2023.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
