Scarab 3.5 – specifications
Built: 2010 · Series: Other models
Data for the version built 2010 · Data origin: Official register · sources
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scarab 3.5 – collective page of sweeper bodies on a 3.5-tonne chassis outside the named series: 2,970 cc four-cylinder, kerb weight 1,720 kg, width 1,700 mm
Scarab is a British maker of street-sweeper bodies and belongs to the French Fayat group; this collective page lists the versions designated 3.5, which the register has not assigned to a named series of its own. The designation 3.5 refers to the 3.5-tonne gross weight of the chassis on which the sweeper body is fitted.
Read on 4 more paragraphs
The register lists here 2 versions with a four-cylinder engine of 2,970 cc, a kerb weight of 1,720 kg, a gross weight of 3,500 kg and a width of 1,700 mm.
Sweepers of this light class clean pavements, cycle paths, car parks and narrower streets for municipalities and private cleaning contractors, where larger sweeper bodies would be too unwieldy; the compact chassis also turns easily in tight town-centre lanes and pedestrian zones.
When buying used, check wear on the brooms and sweeping rollers, the condition of the suction system and water tanks, corrosion of the body caused by moisture and swept material, the condition of the hydraulics and auxiliary drive, and the clutch and brakes of the chassis; for municipally run machines the service history is also worth checking.
As an EU class N1 vehicle up to 3.5 tonnes, the sweeper chassis can be driven on a category B licence; it is a bare chassis with a special-purpose body rather than a panel van, which is why the entire sweeping mechanism, with its own drive for the brooms, suction system and water tank, is mounted behind the cab.
Sources: SpecCodex register, model data: Scarab
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,970 cm³correct |
Dimensions and weights
| Width | 1,700 mmcorrect |
|---|---|
| Wheelbase | 2,000 mmcorrect |
| Unladen weight | 1,720 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Scarab 3.5 weigh?
The unladen weight is 1,720 kg.
What is the gross vehicle weight of the Scarab 3.5?
3,500 kg.
What engine does the Scarab 3.5 have?
4 cylinders, 2,970 cm³ displacement.
When was the Scarab 3.5 built?
Production years: 2010.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.