Nekaf - – specifications
Built: 1955–1960 · Series: Other models
Data for the version built 1955–1960 · Data origin: Official register · sources
More machines from model year 1955
Nekaf – other models: Dutch licensed production of the Willys/Kaiser Jeep M38A1, four-cylinder engine of around 2.2 litres, kerb weights from 1,020 to 1,360 kg for military and NATO use
Nekaf, the Nederlandsche Kaiser-Frazer Fabrieken in Rotterdam, built the Willys/Kaiser Jeep M38A1 under licence in the 1950s for the Dutch armed forces and NATO. This collective page gathers versions outside the named ranges, recognisable by designations such as M38, M38A1, CJ-5 and the military name Jeep; the recurring designation M38A1 with the suffix 1/4 Ton refers to the quarter-ton payload class typical of US military vehicles of this size.
Read on 3 more paragraphs
The register lists 20 versions with an engine displacement from 2,199 to 2,200 cm³, four- to six-cylinder engines, kerb weights from 1,020 to 1,360 kg, gross vehicle weights from 1,170 to 1,983 kg and widths from 1,540 to 1,760 mm; length is recorded at around 3,510 mm.
As the Dutch licensed version of the American military jeep, the Nekaf served in the armed forces and, under NATO standardisation, was also supplied to allied armies; after military service, many vehicles passed into civilian surplus use in agriculture and off-road work. As the Dutch contribution to the shared post-war jeep production, the Nekaf is a fixed part of Dutch military vehicle history.
Buying used, what matters is corrosion of the chassis and tub, the condition of the transfer case and axles, and the electrical system, wired to 6 or 12 volts depending on the model year. The condition of the open body's panels and the completeness of the military fittings strongly affect value; spare parts come through the trade in jeep and military vehicle accessories.
Sources: SpecCodex register, model data: Nekaf (weitere Modelle), Zulassungsdaten RDW (Niederlande)
Technical data
Engine
| Cylinders | 4correct |
|---|
Dimensions and weights
| Width | 1,670 mmcorrect |
|---|---|
| Wheelbase | 2,060 mmcorrect |
| Unladen weight | 1,260 kgcorrect |
| Gross vehicle weight | 1,768 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Nekaf - weigh?
The unladen weight is 1,260 kg.
What is the gross vehicle weight of the Nekaf -?
1,768 kg.
What engine does the Nekaf - have?
4 cylinders.
When was the Nekaf - built?
Production years: 1955–1960.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
CJ-5
CJ-5 JEEP
CJ5
JEEP
JEEP M 38 A1
JEEP M38
JEEP M38 A1 1/4 TON 4X4
M 38
M 38 A1
M38
M38 A1
M38 A1 1/4 TON 4X4
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
