Mulder KIPPER
Built: 1995–2018 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Length | 5,100 mmcorrect |
|---|---|
| Width | 2,000 mmcorrect |
| Wheelbase | 3,900 mmcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 50 km/hcorrect |
Frequently asked questions
Up to what speed is the Mulder KIPPER approved?
Approved up to 50 km/h.
What are the dimensions of the Mulder KIPPER?
5,100 mm × 2,000 mm.
When was the Mulder KIPPER built?
Production years: 1995–2018.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.