Map WC
Built: 2006 · Series: Other models
More machines from model year 2006
Map – other models: the collective page of trailers outside the named ranges, type codes such as 2.0T and OP7.5T by tonnage, classes O2 and O3, unladen weight 320–4,730 kg, length up to 11.92 m
This collective page gathers the Map trailers outside the named ranges. The type codes clearly follow a weight logic: 2.0T and OP7.5T state the tonnage directly, AMD3503 sits around 3,500 kg permissible gross weight and A2702 near 2,700 kg – figures also found in the register under A1600Z, AM2600, BT1451, OP68L1, OP7LL, OPL68L1 and the short 215 and WC. Under EU vehicle classification, trailers up to 3.5 tonnes fall into class O2, from 3.5 to 10 tonnes into class O3.
Read on 3 more paragraphs
The register lists here 14 versions with unladen weights from 320 to 4,730 kg, permissible gross weights from 1,450 to 7,500 kg, lengths from 6,000 to 11,920 mm and widths from 1,690 to 2,550 mm.
The span thus runs from light O2 trailers to the O3 class above 3.5 tonnes, with long versions over eleven metres for bulky loads such as timber, machinery or containers. The programme serves both private and light commercial haulage behind a car and heavier payloads for trades, construction and agriculture, where a trailer with an overrun brake up to 3.5 tonnes can still be towed on a standard car licence.
Buying used, check axle capacity and the brake system against the type designation, corrosion on the frame and load floor, and the condition of the coupling, jockey wheel and breakaway cable; on the long versions also check frame flex, the condition of the side panels and the tightness of the tarpaulin or its bows. Spares for axles and brake components on these standard sizes are usually available independent of the manufacturer.
Sources: SpecCodex register, model data: Map (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,380 mmcorrect |
|---|---|
| Unladen weight | 1,400 kgcorrect |
| Gross vehicle weight | 1,600 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Map WC weigh?
The unladen weight is 1,400 kg.
What is the gross vehicle weight of the Map WC?
1,600 kg.
Up to what speed is the Map WC approved?
Approved up to 100 km/h.
When was the Map WC built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
