Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Klaus › -

Klaus -

Built: 1993 · Series: Other models

More machines from model year 1993

The manufacturer of this trailer is Klaus. According to the available register data, the vehicle dates from 1993. The trailer is 14,000 mm long and 2,500 mm wide. Its kerb weight comes to 4,680 kg. Fully loaded, it may not exceed 18,000 kg. The wheelbase measures 7,300 mm. Top speed is 100 km/h. The Dutch vehicle register lists one example of this model.

Klaus SAL 2,4: an EU class O2 trailer with a 3,500 kg gross weight, 6.22 m length and a tandem axle group spread over 4.95 m

With a gross weight of 3,500 kg, the SAL 2,4 falls into EU trailer class O2, the typical size for trailers behind cars and light commercial vehicles between 750 kg and 3.5 tonnes. At 6.22 m long it is a comparatively elongated build for its weight class, pointing to bulky rather than heavy loads.

Read on 3 more paragraphs

At a kerb weight of 1,450 kg, the payload works out to 2,050 kg, more than the trailer's own weight. The four wheels are spread across a tandem axle group with a 4.95 m spacing, almost as long as the overall build itself – the two axles sit far apart rather than close together, spreading the load along the whole length instead of concentrating it at one point. The width is 2.28 m.

Despite the tandem axle group, the SAL 2,4 stays in class O2 and so almost always runs on an overrun brake rather than an air system. Widely spaced axles like these are typical of long platform or stake bodies used for building components, pipes or agricultural equipment, and improve tipping stability with long loads.

When buying used, the two widely separated axle mounting points on the frame deserve particular attention, since torsion over the long span can crack the welds. The condition of the overrun mechanism, brake cables and the leaf springs on both axles, which carry uneven loads when the trailer is loaded unevenly, are equally worth checking.

Sources: SpecCodex-Register: Kennwerte des Modells Klaus SAL 2,4

Technical data

Dimensions and weights

Length14,000 mmcorrect
Width2,500 mmcorrect
Wheelbase7,300 mmcorrect
Unladen weight4,680 kgcorrect
Gross vehicle weight18,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Klaus - weigh?

The unladen weight is 4,680 kg.

What is the gross vehicle weight of the Klaus -?

18,000 kg.

Up to what speed is the Klaus - approved?

Approved up to 100 km/h.

What are the dimensions of the Klaus -?

14,000 mm × 2,500 mm.

When was the Klaus - built?

Production years: 1993.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare