Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Gleich › Other models › -

Gleich -

Built: 2003 · Series: Other models

More machines from model year 2003

The photo shows the HS211-1 from the same series. Source: https://www.technikboerse.com/en/marke/duelk-24169
Gleich builds this trailer. According to the available register data, the vehicle dates from 2003. Dimensions: 2,600 mm wide. Empty, it weighs 5,440 kg. The permitted gross weight is 16,000 kg. Axle to axle, the wheelbase is 1,460 mm. It reaches up to 100 km/h. According to the Dutch vehicle register, one example of this model is on record.

Gleich – other models: the collective page of trailers outside the named ranges, with HS211-1 and MSK 12-1, 5,440 to 10,470 kg unladen weight, 10,500 to 16,000 kg gross weight

This page gathers the Gleich trailers the register could not assign to a named range. The designations HS211-1 and MSK 12-1 stand side by side, with no consistent range logic readable from them. As with many smaller trailer brands, the programme is drawn from registration data, in which each vehicle is listed individually with its technical values.

Read on 3 more paragraphs

The register lists here 3 versions with unladen weights from 5,440 to 10,470 kg, gross weights from 10,500 to 16,000 kg, a length of 11,550 mm and widths from 2,450 to 2,600 mm.

With gross weights above ten tonnes, all versions belong to the heavy-duty trailer class, towed behind lorries for construction, transport or special loads. The width of up to 2,600 mm matches the permitted maximum width for commercial vehicles and points to full-width bodies rather than narrow special trailers.

On a used example in this weight class, axle condition and load rating, the function of the braking system including drums or discs, rust on frame, chassis rails and coupling, and the state of lighting and electrical plug all count. Tyres and rims must be rated for the respective axle load. Parts usually run through independent commercial-vehicle workshops. For operation behind the tractor unit, besides the trailer's rated gross weight the tractor's rated towing capacity is also decisive, since it sets the real limit in heavy-duty operation.

Sources: SpecCodex register, model data: Gleich (weitere Modelle)

Technical data

Dimensions and weights

Width2,600 mmcorrect
Wheelbase1,460 mmcorrect
Unladen weight5,440 kgcorrect
Gross vehicle weight16,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Gleich - weigh?

The unladen weight is 5,440 kg.

What is the gross vehicle weight of the Gleich -?

16,000 kg.

Up to what speed is the Gleich - approved?

Approved up to 100 km/h.

When was the Gleich - built?

Production years: 2003.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare