Eder 27-21/46 Z
Built: 2016 · Series: Other models
More machines from model year 2016
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eder – other models: the collective page for trailers outside the named series, Euro-Trans and AT series for vehicle and machinery transport, unladen weight 496 to 750 kg at gross weight up to 3.5 tonnes
This page collects Eder trailers that the register could not assign to a named series. The models belong mainly to the Euro-Trans and AT series, whose names combine a number for load length or equipment with a suffix such as X, Z, LB or MX, for example AT 2508 LB or Euro-Trans 35-21/53X; the second group of digits after the slash often gives further build dimensions.
Read on 3 more paragraphs
The register lists 39 versions with unladen weights from 496 to 750 kg and gross weights from 2,000 to 3,500 kg. Lengths are recorded for 20 of the 39 models and run from 5,880 to 7,330 mm, widths sit between 1,800 and 2,380 mm.
With a low unladen weight combined with a long load area and a payload allowance up to 3.5 tonnes, Eder trailers are built for carrying bulky but comparatively light loads such as vehicles, small machinery or boats. Such light low-loaders with a long platform are common in both trade and private transport, since they can be towed by many cars and light commercial vehicles.
On a used unit, check above all the condition of the load area and ramps, the function of the overrun brake, rust on the frame and drawbar, and the condition of the axle and tyres. On vehicle transporters, also check the mounting of the lashing points. Parts for axles, lighting and brakes are available through the general trailer accessory trade.
Technical data
Dimensions and weights
| Length | 5,920 mmcorrect |
|---|---|
| Width | 2,100 mmcorrect |
| Wheelbase | 3,900 mmcorrect |
| Unladen weight | 601 kgcorrect |
| Gross vehicle weight | 2,700 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Eder 27-21/46 Z weigh?
The unladen weight is 601 kg.
What is the gross vehicle weight of the Eder 27-21/46 Z?
2,700 kg.
Up to what speed is the Eder 27-21/46 Z approved?
Approved up to 100 km/h.
What are the dimensions of the Eder 27-21/46 Z?
5,920 mm × 2,100 mm.
When was the Eder 27-21/46 Z built?
Production years: 2016.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
27-21/41 X
27-21/41 Z
27-21/41X
30-21/41 X
30-21/46X
30-21/48 X
35-21/41X
35-21/48 X
35-21/53 X
35-21/53X
35-22/53X
35-22/60X
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.