Boecker HD22 1/4
Built: 1990 · Series: Other models
More machines from model year 1990
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Böcker – other models: AHK-series trailer cranes and HD-series inclined hoists plus Arriva cranes, 830 to 6,830 kg kerb weight, up to 16 t gross vehicle weight
This page gathers Böcker trailers outside the named ranges. Böcker Maschinenwerke of Werne builds AHK-series trailer-mounted cranes and mobile inclined hoists for moving materials on building sites, listed under the designation HD; the Arriva range adds a compact trailer crane for roofing and façade work. The variety of models across the AHK, HD and Arriva ranges shows that this collective page brings together several Böcker product lines for building-site and façade use.
Read on 3 more paragraphs
The register lists here 78 versions with kerb weights from 830 to 6,830 kg and gross vehicle weights from 1,000 to 16,000 kg, at widths from 1,250 to 2,550 mm; length is only recorded for part of the models and ranges from 5,100 to 12,730 mm.
Böcker supplies mainly roofing, scaffolding and façade contractors, who use the inclined hoist to move material onto a roof or scaffold, while the trailer cranes serve as a mobile lifting aid on sites without a fixed crane. The inclined hoists can usually be towed by a car and are often kept in the rental fleets of larger construction firms and scaffolding contractors.
When buying used, check on the hoists the condition of the running rail and cable winch, load capacity and limit switches; on the trailer cranes the condition of the jib, hydraulics and outriggers, plus a current inspection sticker and the chassis brake system. For both equipment types it is also worth checking operating hours, the service book, and tyre and lighting condition; parts and service are handled by Böcker's own factory support.
Sources: Kennwerte der Modelle Böcker (weitere Modelle), Böcker (Hersteller)
Technical data
Dimensions and weights
| Width | 1,620 mmcorrect |
|---|---|
| Unladen weight | 1,120 kgcorrect |
| Gross vehicle weight | 1,300 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Boecker HD22 1/4 weigh?
The unladen weight is 1,120 kg.
What is the gross vehicle weight of the Boecker HD22 1/4?
1,300 kg.
Up to what speed is the Boecker HD22 1/4 approved?
Approved up to 100 km/h.
When was the Boecker HD22 1/4 built?
Production years: 1990.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
13/15K
AB
AB10/12
ABT 13/15 K
ABT 13/15K
AHK 25/800
ALBERT
ANHÄNGERKRAN AHK 805
ANHÄNGERKRAN AHK 805
ARRIVA 26
ARRIVA HD 25/1-6LH
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.