Boecker Anhängerkran AHK 30/1500
Built: 2019 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Boecker Anhängerkran AHK 30/1500 is a trailer from Boecker (EU vehicle class O3), registered as built in 2019. It is 9,034 mm long and 2,262 mm wide, weighs 3,330 kg unladen and has a permitted gross weight of 3,650 kg.
Subtracting the unladen weight from the permitted gross weight leaves the Boecker Anhängerkran AHK 30/1500 with a payload of 320 kg. The trailer itself therefore accounts for the larger share of its gross weight.
With a permitted gross weight of 3,650 kg the trailer exceeds the BE limit of 3,500 kg. It requires a C1E licence as long as the combination stays within 12,000 kg, otherwise CE – in practice behind a truck or an agricultural tractor.
Among the 29 trailers from Boecker with a stated length, the Boecker Anhängerkran AHK 30/1500 at 9,034 mm is in the middle of the range (rank 14); the range runs from 5,100 to 12,730 mm. The Finnish vehicle register lists one unit – one of the brand's most common models.
Böcker – other models: AHK-series trailer cranes and HD-series inclined hoists plus Arriva cranes, 830 to 6,830 kg kerb weight, up to 16 t gross vehicle weight
This page gathers Böcker trailers outside the named ranges. Böcker Maschinenwerke of Werne builds AHK-series trailer-mounted cranes and mobile inclined hoists for moving materials on building sites, listed under the designation HD; the Arriva range adds a compact trailer crane for roofing and façade work. The variety of models across the AHK, HD and Arriva ranges shows that this collective page brings together several Böcker product lines for building-site and façade use.
Read on 3 more paragraphs
The register lists here 78 versions with kerb weights from 830 to 6,830 kg and gross vehicle weights from 1,000 to 16,000 kg, at widths from 1,250 to 2,550 mm; length is only recorded for part of the models and ranges from 5,100 to 12,730 mm.
Böcker supplies mainly roofing, scaffolding and façade contractors, who use the inclined hoist to move material onto a roof or scaffold, while the trailer cranes serve as a mobile lifting aid on sites without a fixed crane. The inclined hoists can usually be towed by a car and are often kept in the rental fleets of larger construction firms and scaffolding contractors.
When buying used, check on the hoists the condition of the running rail and cable winch, load capacity and limit switches; on the trailer cranes the condition of the jib, hydraulics and outriggers, plus a current inspection sticker and the chassis brake system. For both equipment types it is also worth checking operating hours, the service book, and tyre and lighting condition; parts and service are handled by Böcker's own factory support.
Sources: SpecCodex register, model data: Böcker, Böcker
Technical data
Dimensions and weights
| Length | 9,034 mmcorrect |
|---|---|
| Width | 2,262 mmcorrect |
| Unladen weight | 3,330 kgcorrect |
| Gross vehicle weight | 3,650 kgcorrect |
Frequently asked questions
How much does the Boecker Anhängerkran AHK 30/1500 weigh?
The unladen weight is 3,330 kg.
What is the gross vehicle weight of the Boecker Anhängerkran AHK 30/1500?
3,650 kg.
What are the dimensions of the Boecker Anhängerkran AHK 30/1500?
9,034 mm × 2,262 mm.
When was the Boecker Anhängerkran AHK 30/1500 built?
Production years: 2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
