Beco Trailers 3.SAN-1N
Built: 2023 · Series: Other models
More machines from model year 2023
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Beco Trailers – other models: the collective page of heavy-duty semi-trailers outside the named ranges, unladen weights from 6,800 to 14,920 kg, gross weights from 24,000 to 62,000 kg
This page gathers the Beco Trailers semi-trailers the register could not assign to a named range. The type designations such as 2+2.San, 3.San-1N, 4.Sou-3H-RM1 and 4.Sou-4H carry leading digits that mark the axle count in the register. The letter suffixes evidently distinguish version variants within the same axle configuration in the register.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 6,800 to 14,920 kg, gross weights from 24,000 to 62,000 kg, lengths from 8,590 to 12,430 mm and widths from 2,550 to 2,750 mm.
With gross weights up to 62 tonnes, the semi-trailers fall into the upper span of vehicle class O4 and are built for heavy-load transport, for example construction machinery, prefabricated components or other compact, very heavy cargo where payload matters more than volume. Vehicles of this weight class require separate abnormal-load permits depending on the route and country.
Buying used, the condition of the chassis and reinforcements, the axle load of the individual axles and their steering on multi-axle versions, the brake system and tyres, and lashing points and ramps matter on heavy-load semi-trailers; with a high gross weight rating, a complete inspection history is particularly important. Since such semi-trailers often run under special-transport permits, it is also worth checking the documentation of past special permits and route approvals.
Sources: SpecCodex register, model data: Beco Trailers (weitere Modelle)
Technical data
Dimensions and weights
| Length | 8,590 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 6,770 mmcorrect |
| Unladen weight | 6,800 kgcorrect |
| Gross vehicle weight | 24,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Beco Trailers 3.SAN-1N weigh?
The unladen weight is 6,800 kg.
What is the gross vehicle weight of the Beco Trailers 3.SAN-1N?
24,000 kg.
Up to what speed is the Beco Trailers 3.SAN-1N approved?
Approved up to 100 km/h.
What are the dimensions of the Beco Trailers 3.SAN-1N?
8,590 mm × 2,550 mm.
When was the Beco Trailers 3.SAN-1N built?
Production years: 2023.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
