Technical register for agricultural, construction and commercial machinery · sourced data

Baugesellschaft Michelsohn Baumi

Built: 1923–1927 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Pozostałe modele series from Baugesellschaft Michelsohn includes the Baumi. Production: 1923–1927. The engine delivers 16 hp, has 1 cylinder, with a displacement of 7,917 cm³. Rated speed is 460 rpm. The machine is 2,800 mm long and 1,600 mm wide. The unladen weight is 3,450 kg. The wheelbase measures 1,620 mm. Top speed is 8 km/h. Transmission: 2V/1R. The engine is water-cooled. The fuel is Rohöl/Schweröl. Construction: cast-frame construction. The gearbox offers 2 forward gears. There are also 1 reverse gears. Rated output within this group ranges from 2 to 760 hp; the Baumi sits at the bottom of that range with 16 hp. Its immediate neighbours are the PONY 811/812 below it with 15.8 hp and the 1210 (A) above it with 16.1 hp. Unladen weight within this group ranges from 14 to 27,215.5 kg; here the Baumi sits at the bottom of that range with 3,450 kg.

Baugesellschaft Michelsohn Baumi: the single-cylinder crude-oil tractor from the 1920s, 7,917 cm³ displacement, 16 hp at 460 rpm and an 8 km/h top speed

The Baumi was built from 1923 to 1927 and is thus among the early motorised farm tractors of the 1920s, a time when the tractor was only beginning to displace the horse-drawn team in agriculture.

Read on 3 more paragraphs

The engine is a single-cylinder of 7,917 cm³ displacement, producing 16 hp at just 460 rpm and running on crude oil or heavy oil; cooling is by an evaporative cooler. The tractor is 2,800 mm long, 1,600 mm wide, has a wheelbase of 1,620 mm, weighs 3,450 kg and reaches a top speed of 8 km/h.

A single, very large-volume cylinder at low speed running on crude oil is typical of the semi-diesel hot-bulb engines of the 1920s, which ran on heavy, cheap oil without the precision of an injection pump, and were robust and simple to maintain in return. At 8 km/h, the tractor was built for pure fieldwork, not for transport on the road. The low engine speed also meant lower mechanical loads, which, given the simple materials of the period, extended the engine's service life.

A vehicle of this age is today primarily a collector's piece; on acquisition, what matters is the condition of the cylinder and the evaporative cooler, whether the hot bulb or ignition device still works, and rust on the frame and sheet-metal parts after nearly a century. It is also worth assessing whether the original wheels and fittings have survived, since their absence considerably complicates the vehicle's historical documentation. Spare parts are practically no longer available through regular trade, only through collectors and reproduction.

Sources: SpecCodex-Register: Kennwerte des Modells Baumi

Technical data

Engine

FuelRohöl/Schwerölcorrect
Power16 hpcorrect
Rated speed460 rpmcorrect
Cylinders1correct
Displacement7,917 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length2,800 mmcorrect
Width1,600 mmcorrect
Wheelbase1,620 mmcorrect
Unladen weight3,450 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox2V/1Rcorrect
Forward gears2correct
Reverse gears1correct
Top speed8 km/hcorrect

Origin and approval

Constructioncast-frame constructioncorrect

Where this model stands

Power-to-weight ratio: 3.4 kW/t (12 kW / 3.5 t)

Power class: Compact (< 40 hp)

Stronger than 4% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Baugesellschaft Michelsohn Baumi have?

The Baugesellschaft Michelsohn Baumi delivers 16 hp.

How much does the Baugesellschaft Michelsohn Baumi weigh?

The unladen weight is 3,450 kg.

What engine does the Baugesellschaft Michelsohn Baumi have?

1 cylinders, 7,917 cm³ displacement, Rohöl/Schweröl.

How fast does the Baugesellschaft Michelsohn Baumi go?

Top speed is 8 km/h.

What are the dimensions of the Baugesellschaft Michelsohn Baumi?

2,800 mm × 1,600 mm.

When was the Baugesellschaft Michelsohn Baumi built?

Production years: 1923–1927.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare