Bateck Trailers TRAITERS
Built: 2019 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bateck Trailers – other models: the collective page of heavy low-loader trailers outside the named ranges, from the 1000-2E to the 4200-3D, unladen weight 1,050 to 10,690 kg, gross weight up to 43 t
This page gathers the Bateck Trailers trailers the register could not assign to a named range. The type designations combine a number from 350 to 4200 with the axle count 2 or 3 and a letter, as in the 1800-2D or the 4200-3D. Models such as the 690-2D at the lower end and the 4200-3D at the upper end of the series show the span of the line, from smaller construction-machinery trailers to heavy three-axle low-loaders.
Read on 3 more paragraphs
The register lists here 12 versions with unladen weights from 1,050 to 10,690 kg, gross weights from 3,500 to 43,000 kg, lengths from 7,070 to 13,960 mm and widths from 2,210 to 2,600 mm.
With gross weights up to 43 tonnes and lengths up to almost 14 metres, the Bateck line sits in the class of heavy semi-trailers and low-loaders for transporting machinery, building materials and heavy goods in commercial long-haul transport. Multi-axle low-loaders of this kind often carry a steerable trailing axle that eases tight turns and site access.
Used, on these heavy semi-trailers the frame and axle assemblies should be checked for rust and cracks, the brake system and air suspension, the function of the ramps and load beds, and tyres and kingpin; on low-loaders the hydraulics for the lowering axles as well. It is also worth checking the registration papers, since special transports beyond certain dimensions require an exemption permit.
Sources: SpecCodex register, model data: Bateck Trailers (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,250 mmcorrect |
|---|---|
| Wheelbase | 601 mmcorrect |
| Unladen weight | 1,050 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Bateck Trailers BATECK TRAITERS weigh?
The unladen weight is 1,050 kg.
What is the gross vehicle weight of the Bateck Trailers BATECK TRAITERS?
3,500 kg.
Up to what speed is the Bateck Trailers BATECK TRAITERS approved?
Approved up to 100 km/h.
When was the Bateck Trailers BATECK TRAITERS built?
Production years: 2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.