Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Antonio Carraro › Serie R › SRX 10900 R

Antonio Carraro SRX 10900 R

Built: 2017 · Series: Serie R

More machines from model year 2017

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the SRX 10900 R, Antonio Carraro offers a model from the R series. Production: 2017. The engine delivers 98 hp (72 kW), has 4 cylinders, with a displacement of 3,769 cm³. Rated speed is 2,400 rpm. The machine is 3,630 mm long. The unladen weight is 2,125 kg. Top speed is 40 km/h. The engine is water-cooled. The fuel is diesel. Rated output across the Antonio Carraro range ranges from 18.5 to 98 hp; the SRX 10900 R sits at the top of that range with 98 hp. Its immediate neighbours are the Ergit 100 SRX 9800 below it with 87 hp. Rated output across the Antonio Carraro range ranges from 18.5 to 98 hp; here the SRX 10900 R sits at the top of that range with 98 hp. 67 Antonio Carraro models across 12 series are on record.

Antonio Carraro Serie R SRX 10900 R: the compact tractor from the Italian specialty-crop maker, a four-cylinder diesel of 3,769 cm³, 72 kW, a 40 km/h top speed, built in 2017

Antonio Carraro is an Italian family business from the Padua area, specialising in compact tractors for specialty crops such as vineyards and orchards as well as municipal use. The SRX 10900 R belongs to the Serie R and dates from 2017.

Read on 3 more paragraphs

The engine is a water-cooled four-cylinder diesel of 3,769 cm³ producing 72 kW (98 hp) at 2,400 rpm. The tractor is 3,630 mm long, weighs 2,125 kg and reaches a design top speed of 40 km/h. This combination of over 70 kW and an unladen weight of just over two tonnes makes the tractor comparatively powerful for its segment.

With close to 100 hp from a four-cylinder at a comparatively low unladen weight, this tractor is among the stronger compact machines of its class, of the kind needed for professional work on specialty-crop land and in municipal use. At 40 km/h it falls within Germany's T driving-licence category. Implements mounted on the front linkage at this engine output are usually matched with a category I linkage.

When buying used, what matters is the engine's operating hours, the condition of the hydraulics for changing implements, the steering and brakes given the top speed that is high for a compact tractor, and, if used in a vineyard or orchard, rust on sheet-metal parts from crop-protection chemicals. The PTO shaft and clutch linings should also be checked, since these parts wear particularly with frequent implement changes. Spare parts run through the Antonio Carraro dealer network.

Sources: SpecCodex-Register: Kennwerte des Modells SRX 10900 R, Antonio Carraro (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power98 hp (72 kW)correct
Rated speed2,400 rpmcorrect
Cylinders4correct
Displacement3,769 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,630 mmcorrect
Unladen weight2,125 kgcorrect

Drivetrain and chassis

Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 33.9 kW/t (72 kW / 2.1 t)

Power class: Universal (40–100 hp)

Stronger than 65% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Antonio Carraro SRX 10900 R have?

The Antonio Carraro SRX 10900 R delivers 98 hp.

How much does the Antonio Carraro SRX 10900 R weigh?

The unladen weight is 2,125 kg.

What engine does the Antonio Carraro SRX 10900 R have?

4 cylinders, 3,769 cm³ displacement, Diesel.

How fast does the Antonio Carraro SRX 10900 R go?

Top speed is 40 km/h.

When was the Antonio Carraro SRX 10900 R built?

Production years: 2017.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare