Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Alpenland › K 25

Alpenland K 25

Built: 1950–1952 · Series: K

More machines from model year 1950

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Alpenland K 25 belongs to the K series. Production: 1950–1952. The engine delivers 25 hp (18.3 kW), has 2 cylinders, with a displacement of 2,356 cm³. Rated speed is 1,500 rpm. The machine is 3,000 mm long, 1,600 mm wide and 1,550 mm high. The unladen weight is 1,450 kg. The wheelbase measures 1,750 mm. Ground clearance is 400 mm. Top speed is 20 km/h. Transmission: 5V / 1R. The engine is water-cooled. Tyres: front 5.00-16, rear 9.00-24. The fuel is diesel. Construction: frameless unit construction. The gearbox offers 5 forward gears. There are also 1 reverse gears. Rated output within this group ranges from 2 to 760 hp; the K 25 sits at the bottom of that range with 25 hp. Its immediate neighbours are the SUPER-FC below it with 24.8 hp and the L2501-2WD above it with 25.1 hp. Rated output within this group ranges from 5 to 585 hp; here the K 25 sits at the bottom of that range with 25 hp.

Alpenland K 25 – tractor of the K range (1950–1952): water-cooled twin-cylinder diesel with 2,356 cm³ displacement, 18.3 kW/25 hp and 1,450 kg unladen weight

The K range, with the model K 25, succeeded Alpenland's smaller GS range; it was built from 1950 to 1952 and, with a twin-cylinder engine, was a more powerful design than its predecessor. Like its smaller sister range, the K range relied on a robust, water-cooled engine and simple mechanics, but now with two cylinders for more pulling power and smoother running.

Read on 3 more paragraphs

The K 25 is powered by a water-cooled twin-cylinder diesel engine with 2,356 cm³ displacement, producing 18.3 kW or 25 hp at 1,500 rpm. The machine is 3,000 mm long, 1,600 mm wide and 1,550 mm high, has a wheelbase of 1,750 mm, weighs 1,450 kg and reaches 20 km/h.

At 20 km/h, the K 25 falls into driving licence category L. The twin-cylinder engine of 2.4 litres places the K 25 in the mid-range of early post-war tractors, clearly more powerful than pure single-cylinder small tractors of those years, yet still far from the later multi-cylinder standard tractors.

On a tractor as old as the K 25, over seventy years, check the cooling system and injection pump, the frame, mudguards and axles for corrosion, and the tightness of the mechanical steering; parts are now only available through collector circles. Besides the cooling system and injection pump, on a K 25 it is also worth checking the clutch and the front-axle bearings, which were put under particular strain over decades of use on uneven ground.

Sources: SpecCodex-Register: Kennwerte des Modells Alpenland K 25

Technical data

Engine

Fueldieselcorrect
Power25 hp (18.3 kW)correct
Rated speed1,500 rpmcorrect
Cylinders2correct
Displacement2,356 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,000 mmcorrect
Width1,600 mmcorrect
Height1,550 mmcorrect
Wheelbase1,750 mmcorrect
Ground clearance400 mmcorrect
Unladen weight1,450 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox5V / 1Rcorrect
Forward gears5correct
Reverse gears1correct
Front tyres5.00-16correct
Rear tyres9.00-24correct
Top speed20 km/hcorrect

Origin and approval

Constructionframeless unit constructioncorrect

Where this model stands

Power-to-weight ratio: 12.6 kW/t (18 kW / 1.4 t)

Power class: Compact (< 40 hp)

Stronger than 12% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Alpenland K 25 have?

The Alpenland K 25 delivers 25 hp.

How much does the Alpenland K 25 weigh?

The unladen weight is 1,450 kg.

What engine does the Alpenland K 25 have?

2 cylinders, 2,356 cm³ displacement, Diesel.

How fast does the Alpenland K 25 go?

Top speed is 20 km/h.

What are the dimensions of the Alpenland K 25?

3,000 mm × 1,600 mm × 1,550 mm.

When was the Alpenland K 25 built?

Production years: 1950–1952.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare