Allis Gleaner Corporation LT-85
Built: 2002–2004 · Series: LT-Serie
More machines from model year 2002
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Allis-Gleaner Corporation (AGCO) LT series – LT-70 to LT-90: the mid-size utility tractors after Deutz-Allis, 52 to 65 kW
The LT series held the mid-size utility-tractor class at the Allis-Gleaner Corporation (AGCO), between the compact GT and the big DT series: the LT-70, LT-75, LT-85 and LT-90 with four-cylinder diesel engines. The Allis-Gleaner Corporation emerged in 1990 from the management buyout of the farm-equipment division of Klöckner-Humboldt-Deutz, previously Deutz-Allis, becoming the foundation of today's AGCO group, headquartered in Duluth, Georgia.
Read on 3 more paragraphs
The register lists here 4 versions with 52.2 to 64.7 kW from four-cylinders of 3,927 to 4,484 cm³ displacement, torque from 319 to 436 Nm at 2,200 rpm, unladen weights from 3,697 to 4,198 kg, lengths from 4,191 to 4,204 mm, a width of 2,108 mm and heights from 2,616 to 2,794 mm – all with diesel engines.
As a mid-size class, the LT series covered the broad field of mixed farm work, from forage production to lighter fieldwork, making it the most sought-after size class for family farms combining livestock and arable work across a wide range of regions.
Used, the LT series calls for checking engine condition and the cooling system, clutch and synchromesh gearbox, hydraulics and PTO for mounted implements, and front axle and steering geometry; brakes, electrics and cab seals should also be inspected. Spare parts run through the AGCO organisation.
Sources: SpecCodex register, model data: Allis-Gleaner Corporation LT-Serie, AGCO Corporation
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 87 hp (64 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 372 Nmcorrect |
| Speed at max. torque | 1,499 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,927 cm³correct |
| Bore | 102.1 mmcorrect |
| Stroke | 119.9 mmcorrect |
| Compression ratio | 17correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,191 mmcorrect |
|---|---|
| Width | 2,108 mmcorrect |
| Height | 2,616 mmcorrect |
| Wheelbase | 2,438 mmcorrect |
| Unladen weight | 3,908 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 24 V/24 R, 12 V/12 R and 12 V/4 Rcorrect |
| Front tyres | 11.00-16 ASF (4 WD: 380/70 R 28 AS)correct |
| Rear tyres | 16.9 R 38 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 16.4 kW/t (64 kW / 3.9 t)
Power class: Universal (40–100 hp)
Stronger than 59% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Allis Gleaner Corporation LT-85 have?
The Allis Gleaner Corporation LT-85 delivers 87 hp.
How much does the Allis Gleaner Corporation LT-85 weigh?
The unladen weight is 3,908 kg.
What engine does the Allis Gleaner Corporation LT-85 have?
4 cylinders, 3,927 cm³ displacement, Diesel.
How fast does the Allis Gleaner Corporation LT-85 go?
Top speed is 30 km/h.
What are the dimensions of the Allis Gleaner Corporation LT-85?
4,191 mm × 2,108 mm × 2,616 mm.
When was the Allis Gleaner Corporation LT-85 built?
Production years: 2002–2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.