Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › AGCO White › 6124

AGCO White 6124

Built: 1994–1997 · Series: WORKHORSE-SERIE

More machines from model year 1994

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 6124 from AGCO White is part of the WORKHORSE series. Production: 1994–1997. The engine delivers 126 hp (92.7 kW), has 6 cylinders, with a displacement of 5,883 cm³. Torque is 509 Nm. Rated speed is 2,200 rpm. The machine is 4,562 mm long, 2,354 mm wide and 3,023 mm high. The unladen weight is 6,260 kg. The wheelbase measures 2,921 mm. Ground clearance is 584 mm. Top speed is 40 km/h. The tank holds 288 litres. Transmission: 32 V/32 R. The engine is water-cooled. Tyres: front 10.00-16 ASF (4 WD: 14.9 R 28 AS), rear 18.4 R 38 AS. The fuel is diesel. The bore measures 102 mm. The stroke is 120 mm. The compression ratio is 18.5:1. Maximum torque is reached at 1,399 rpm. Construction: unit construction (no separate frame). The gearbox offers 32 forward gears. The linkage is category III. The PTO runs at 540/1000 rpm. The WORKHORSE-SERIE series covers 6 models. Rated output within it ranges from 125 to 218 hp; the 6124 sits at the bottom of that range with 126 hp. Its immediate neighbours are the 6125 below it with 125 hp and the 6144 above it with 145 hp. Unladen weight within it ranges from 6,016 to 8,472 kg; here the 6124 sits at the bottom of that range with 6,260 kg. 25 AGCO White models across 6 series are on record.

AGCO White Workhorse series (1990s) – the silver tractors from Coldwater, Ohio: 6124 to 6215, the last digits as hp class, Cummins six-cylinders of 5.9 and 8.3 litres, 92 to 160 kW, 6.0 to 8.5 t

White was the silver tractor brand that emerged in 1969 from Oliver, Minneapolis-Moline and Cockshutt and was taken over by AGCO in 1991; the Workhorse series of the 1990s was the last range under the AGCO White name, built at the former White plant in Coldwater, Ohio, before AGCO dropped the brand in 2001. The type logic: 6 marks the range, the last digits the hp class – 6124 and 6125 about 125 hp, 6144 about 145, 6175 about 175, 6195 about 195, 6215 about 215 hp – Workhorse the equipment name of the range. The engines are Cummins six-cylinders: the B5.9 of 5.9 litres in the small and the C8.3 of 8.3 litres in the big models, at 2,200 rpm; the transmission was the 18-speed Quadrashift powershift, the cab the one developed by White with the wide all-round view that the AGCO-Allis sister models also carried – the Workhorses are technically twins of the AGCO Allis 9600s and 9700s in silver.

Read on 3 more paragraphs

The register lists 6 versions with 91.9 to 160.3 kW from six-cylinders of 5,880 to 8,270 cm³, torque up to 1,038 Nm, unladen weights from 6,016 to 8,472 kg, lengths from 4,562 to 4,895 mm, widths from 2,200 to 2,935 mm and heights from 3,023 to 3,167 mm.

The Workhorses were sold only in North America and are today the last collectors' pieces of the White brand, whose history began in 1969 with the merger of three traditional makes.

On used tractors, operating hours, Cummins engine and turbocharger, Quadrashift transmission, hydraulics, cab and electronics count; parts run through AGCO and Cummins.

Sources: SpecCodex register, model data: AGCO White Workhorse-Serie, AGCO Corporation (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power126 hp (92.7 kW)correct
Rated speed2,200 rpmcorrect
Torque509 Nmcorrect
Speed at max. torque1,399 rpmcorrect
Cylinders6correct
Displacement5,883 cm³correct
Bore102 mmcorrect
Stroke120 mmcorrect
Compression ratio18.5correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,562 mmcorrect
Width2,354 mmcorrect
Height3,023 mmcorrect
Wheelbase2,921 mmcorrect
Ground clearance584 mmcorrect
Unladen weight6,260 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox32 V/32 Rcorrect
Forward gears32correct
Front tyres10.00-16 ASF (4 WD: 14.9 R 28 AS)correct
Rear tyres18.4 R 38 AScorrect
Top speed40 km/hcorrect

Working data

Fuel tank capacity288 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Other data

Linkage categoryCat IIIcorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 14.8 kW/t (93 kW / 6.3 t)

Power class: Large (100–180 hp)

Stronger than 76% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the AGCO White 6124 have?

The AGCO White 6124 delivers 126 hp.

How much does the AGCO White 6124 weigh?

The unladen weight is 6,260 kg.

What engine does the AGCO White 6124 have?

6 cylinders, 5,883 cm³ displacement, Diesel.

How fast does the AGCO White 6124 go?

Top speed is 40 km/h.

What are the dimensions of the AGCO White 6124?

4,562 mm × 2,354 mm × 3,023 mm.

When was the AGCO White 6124 built?

Production years: 1994–1997.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 29 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare