Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › AGCO Massey Ferguson › MF 8700 › MF 8735

AGCO Massey Ferguson MF 8735

Series: MF 8700

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the MF 8735, AGCO Massey Ferguson offers a model from the MF 8700 series. The engine delivers 380 hp, has 6 cylinders, with a displacement of 8,400 cm³. The unladen weight is 10,800 kg. Top speed is 50 km/h. Transmission: DynaVT. Tyres: front 600/65R34, rear 710/75R42. The fuel is Diesel und AdBlue. The MF 8700 series covers 6 models. Rated output within it ranges from 300 to 400 hp; the MF 8735 sits in the upper part of that range with 380 hp. Its immediate neighbours are the MF 8732 below it with 350 hp and the MF 8737 above it with 400 hp. 146 AGCO Massey Ferguson models across 33 series are on record.

Massey Ferguson MF 8700 (2014–2020) – the big tractors from Beauvais: MF 8727 to MF 8740, the last digits as power step in tens of hp, AGCO Power six-cylinder of 8.4 litres with SCR, Dyna-VT as standard, 220 to 300 kW

The MF 8700 was Massey Ferguson's top range of the 2010s – standard tractors between 270 and 400 hp from the Beauvais plant in northern France, AGCO's largest European plant, as successor to the MF 8600 and predecessor of the MF 8S. The type logic: 87 marks the range, the last two digits the power step in tens of hp – MF 8727 about 270 hp, MF 8730 300 hp, MF 8737 370 hp, MF 8740 about 400 hp with power boost – S the 2016 upgrade to emission stage IV. The engine in all models is the AGCO Power six-cylinder of 8.4 litres from Linnavuori in Finland, with SCR exhaust aftertreatment and AdBlue – noted in the register as diesel and AdBlue – the transmission the stepless Dyna-VT Massey Ferguson has run as standard in the big-tractor class since 2002; the range does not share the cab with front-axle and cab suspension with the Fendt 900 Vario of the same period, but does share transmission and engine with the Challenger MT600.

Read on 3 more paragraphs

The register lists 6 versions with 220 to 300 kW from the six-cylinder of 8,400 cm³ and an unladen weight of 10,800 kg.

The MF 8700 is the tractor of the big arable farms in France, Britain, Eastern Europe and North America; the 8S of 2020 with new cab followed it in the same power class.

On used tractors, operating hours, engine and SCR system, Dyna-VT transmission (oil history, calibration), front-axle and cab suspension, hydraulics and electronics, tyres count; parts run through the AGCO network.

Sources: SpecCodex register, model data: Massey Ferguson MF 8700, Massey Ferguson (AGCO, Hersteller, Beauvais)

Technical data

Engine

FuelDiesel und AdBluecorrect
Power380 hpcorrect
Cylinders6correct
Displacement8,400 cm³correct

Dimensions and weights

Unladen weight10,800 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
GearboxDynaVTcorrect
Front tyres600/65R34correct
Rear tyres710/75R42correct
Top speed50 km/hcorrect

Where this model stands

Power-to-weight ratio: 25.9 kW/t (279 kW / 10.8 t)

Power class: Heavy (> 180 hp)

Stronger than 98% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the AGCO Massey Ferguson MF 8735 have?

The AGCO Massey Ferguson MF 8735 delivers 380 hp.

How much does the AGCO Massey Ferguson MF 8735 weigh?

The unladen weight is 10,800 kg.

What engine does the AGCO Massey Ferguson MF 8735 have?

6 cylinders, 8,400 cm³ displacement, Diesel und AdBlue.

How fast does the AGCO Massey Ferguson MF 8735 go?

Top speed is 50 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare