Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › AGCO Massey Ferguson › MF 7700 › MF 7718

AGCO Massey Ferguson MF 7718

Built: from 2014 · Series: MF 7700

More machines from model year 2014

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AGCO Massey Ferguson MF 7718 is a model in the MF 7700 series. The engine delivers 191 hp (140 kW), has 6 cylinders, with a displacement of 6,600 cm³. The unladen weight is 6,300 kg. Transmission: Dyna6/DynaVT. Tyres: front 480/70R28, rear 580/70R38. The fuel is Diesel und AdBlue. The MF 7700 series covers 9 models. Rated output within it ranges from 140 to 255 hp; the MF 7718 sits in the middle of that range with 191 hp. Its immediate neighbours are the MF 7719 below it with 185 hp and the MF 7720 above it with 200 hp. Unladen weight within it ranges from 5,800 to 7,800 kg; here the MF 7718 sits in the lower part of that range with 6,300 kg. 146 AGCO Massey Ferguson models across 33 series are on record.

Massey Ferguson MF 7700 – Global Large-Tractor Series Since 2014, with Six-Cylinder Engines, 103 to 188 kW/140 to 255 hp and Operating Weight from 5,800 to 7,800 kg

Massey Ferguson launched the MF 7700 series in 2014 as part of a globally unified large-tractor generation. According to the register, output of the recorded models ranges from 103 to 188 kW, using six-cylinder engines with displacement from 6,600 to 7,400 cm³.

Read on 4 more paragraphs

Recorded operating weight runs from 5,800 to 7,800 kg, wheelbase of the recorded models is 3,000 mm, and top speed spans 40 to 50 km/h. Model numbers from MF 7714 to MF 7726 denote ascending power levels within the series.

The MF 7700 series is positioned in the AGCO range as a large mid-class for arable farms with heavy draft requirements. For a used model, check the gearbox variant, as both Dyna-6 powershift and stepless Dyna-VT versions were offered.

With rated outputs from 103 to 188 kW, the MF 7700 series falls within the ISO 730 Category III range for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. The standard diesel-and-AdBlue operation reflects the tightened emissions stages with SCR technology from the 2010s onward, which in this power class complement exhaust gas recirculation and particulate filters.

Massey Ferguson remains part of the AGCO group today, so spare parts for the engine, gearbox and hydraulics of this series run through the existing AGCO parts network.

Sources: SpecCodex register, model data: Massey Ferguson MF 7700, Massey Ferguson

Technical data

Engine

FuelDiesel und AdBluecorrect
Power191 hp (140 kW)correct
Cylinders6correct
Displacement6,600 cm³correct

Dimensions and weights

Unladen weight6,300 kgcorrect

Drivetrain and chassis

GearboxDyna6/DynaVTcorrect
Front tyres480/70R28correct
Rear tyres580/70R38correct

Where this model stands

Power-to-weight ratio: 22.2 kW/t (140 kW / 6.3 t)

Power class: Heavy (> 180 hp)

Stronger than 90% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the AGCO Massey Ferguson MF 7718 have?

The AGCO Massey Ferguson MF 7718 delivers 191 hp.

How much does the AGCO Massey Ferguson MF 7718 weigh?

The unladen weight is 6,300 kg.

What engine does the AGCO Massey Ferguson MF 7718 have?

6 cylinders, 6,600 cm³ displacement, Diesel und AdBlue.

When was the AGCO Massey Ferguson MF 7718 built?

Production years: 2014–?.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare