AGCO Massey Ferguson MF 7716
Built: from 2014 · Series: MF 7700
More machines from model year 2014
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Massey Ferguson MF 7700 – Global Large-Tractor Series Since 2014, with Six-Cylinder Engines, 103 to 188 kW/140 to 255 hp and Operating Weight from 5,800 to 7,800 kg
Massey Ferguson launched the MF 7700 series in 2014 as part of a globally unified large-tractor generation. According to the register, output of the recorded models ranges from 103 to 188 kW, using six-cylinder engines with displacement from 6,600 to 7,400 cm³.
Read on 4 more paragraphs
Recorded operating weight runs from 5,800 to 7,800 kg, wheelbase of the recorded models is 3,000 mm, and top speed spans 40 to 50 km/h. Model numbers from MF 7714 to MF 7726 denote ascending power levels within the series.
The MF 7700 series is positioned in the AGCO range as a large mid-class for arable farms with heavy draft requirements. For a used model, check the gearbox variant, as both Dyna-6 powershift and stepless Dyna-VT versions were offered.
With rated outputs from 103 to 188 kW, the MF 7700 series falls within the ISO 730 Category III range for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. The standard diesel-and-AdBlue operation reflects the tightened emissions stages with SCR technology from the 2010s onward, which in this power class complement exhaust gas recirculation and particulate filters.
Massey Ferguson remains part of the AGCO group today, so spare parts for the engine, gearbox and hydraulics of this series run through the existing AGCO parts network.
Sources: SpecCodex register, model data: Massey Ferguson MF 7700, Massey Ferguson
Technical data
Engine
| Fuel | Diesel und AdBluecorrect |
|---|---|
| Power | 160 hp (118 kW)correct |
| Cylinders | 6correct |
| Displacement | 6,600 cm³correct |
Dimensions and weights
| Unladen weight | 5,800 kgcorrect |
|---|
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | Dyna6/DynaVTcorrect |
| Front tyres | 420/85R28correct |
| Rear tyres | 520/85R38correct |
| Top speed | 50 km/hcorrect |
Where this model stands
Power-to-weight ratio: 20.3 kW/t (118 kW / 5.8 t)
Power class: Large (100–180 hp)
Stronger than 85% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the AGCO Massey Ferguson MF 7716 have?
The AGCO Massey Ferguson MF 7716 delivers 160 hp.
How much does the AGCO Massey Ferguson MF 7716 weigh?
The unladen weight is 5,800 kg.
What engine does the AGCO Massey Ferguson MF 7716 have?
6 cylinders, 6,600 cm³ displacement, Diesel und AdBlue.
How fast does the AGCO Massey Ferguson MF 7716 go?
Top speed is 50 km/h.
When was the AGCO Massey Ferguson MF 7716 built?
Production years: 2014–?.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
