AGCO Massey Ferguson MF 6713 S
Built: from 2016 · Series: MF 6700
More machines from model year 2016
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
AGCO Massey Ferguson MF 6700 – European S range: MF 6713 S and MF 6714 S, large-displacement four-cylinder, 4,900 cm³, 96 to 103 kW at 1,800 rpm
Alongside the Global Series, Massey Ferguson also uses the 6700 designation for a separate, Europe-oriented range. The MF 6713 S and MF 6714 S models carry the S suffix for an upgraded equipment level and rely on a larger, lower-revving four-cylinder engine than similarly named Global Series models.
Read on 3 more paragraphs
The register lists 2 versions here with 96 to 103 kW from the four-cylinder diesel engine of 4,900 cm³ displacement, at 1,800 revolutions per minute. Kerb weight is 5,700 kg.
With its larger displacement at a lower rated speed, this 6700 range targets high torque with lower wear in continuous use, as valued by European arable farms with intensive drawbar work. It thereby positions itself as a separate, comfort-oriented alternative to the similarly designated Global Series models aimed at growth markets, and suits farms that value low engine speeds and quiet, fuel-efficient continuous operation.
When buying used, the turbocharger, intercooler and exhaust aftertreatment with its AdBlue system should be checked, as should the clutch and hydraulic pump of the large-displacement four-cylinder. Frame and front-axle bearings deserve particular attention given this range's higher weights, along with the cab mounts and hydraulic hoses after years of field service; spare parts are supplied by AGCO through its dealer network.
Sources: SpecCodex register, model data: Massey Ferguson MF 6700, Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| Fuel | Diesel und AdBluecorrect |
|---|---|
| Power | 130 hp (96 kW)correct |
| Rated speed | 1,800 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,900 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Unladen weight | 5,700 kgcorrect |
|---|
Drivetrain and chassis
| Drive | Lastschaltgetriebe oder Stufenlosgetriebecorrect |
|---|---|
| Gearbox | Dyna4/Dyna6/DynaVTcorrect |
| Front tyres | 420/85R28correct |
| Rear tyres | 520/85R38correct |
| Top speed | 40 km/hcorrect |
Where this model stands
Power-to-weight ratio: 16.8 kW/t (96 kW / 5.7 t)
Power class: Large (100–180 hp)
Stronger than 77% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the AGCO Massey Ferguson MF 6713 S have?
The AGCO Massey Ferguson MF 6713 S delivers 130 hp.
How much does the AGCO Massey Ferguson MF 6713 S weigh?
The unladen weight is 5,700 kg.
What engine does the AGCO Massey Ferguson MF 6713 S have?
4 cylinders, 4,900 cm³ displacement, Diesel und AdBlue.
How fast does the AGCO Massey Ferguson MF 6713 S go?
Top speed is 40 km/h.
When was the AGCO Massey Ferguson MF 6713 S built?
Production years: 2016–?.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
