AGCO Massey Ferguson MF 7626
Built: 2012–2015 · Series: 7600 er - Reihe
More machines from model year 2012
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
AGCO Massey Ferguson 7600 series – large tractors from Beauvais: MF 7614 to 7626 with a six-cylinder, 6.6 to 7.4-litre displacement, 96 to 186 kW and 6,580 to 8,050 kg unladen weight
The 7600 series is a range of large field tractors from Massey Ferguson's French plant in Beauvais. Massey Ferguson has belonged to the AGCO group since 1994; the Beauvais plant was previously the site of independent French Massey-Ferguson production and still builds the brand's large series today. The four models MF 7614, 7620, 7624 and 7626 are staggered by rising power through the last two digits of their designation and all carry a six-cylinder diesel engine.
Read on 3 more paragraphs
The register lists 4 versions with 96 to 186 kW from six-cylinders with 6,600 to 7,400 cm³ displacement. Unladen weights range from 6,580 to 8,050 kg, and rated speeds lie between 2,100 and 2,200 rpm.
With outputs up to 186 kW, the 7600 series counts among the large field tractors for farms with high draft-power needs, such as tillage and work with heavy mounted implements. Competitors in this segment include John Deere, Case IH and Fendt. It is used mainly for tillage, sowing, transport work and powering trailed harvesting machinery.
When buying used, the operating hours on the six-cylinder, the condition of the lift hydraulics and PTO, the tightness of engine and transmission, and wear on the front axle and tyres on tractors with heavy field use all matter. Spare parts run through the AGCO and Massey Ferguson dealer network. It is also worth checking the on-board electronics, cab mounting and seat suspension, and tyre tread depth.
Sources: SpecCodex register, model data: AGCO Massey Ferguson 7600er-Reihe, Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 255 hp (186 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 7,400 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Wheelbase | 3,000 mmcorrect |
|---|---|
| Unladen weight | 8,050 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 24V / 24Rcorrect |
| Front tyres | 480 / 70 R 30correct |
| Rear tyres | 620 / 70 R 42correct |
| Top speed | 40 km/hcorrect |
Where this model stands
Power-to-weight ratio: 23.1 kW/t (186 kW / 8.1 t)
Power class: Heavy (> 180 hp)
Stronger than 95% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the AGCO Massey Ferguson MF 7626 have?
The AGCO Massey Ferguson MF 7626 delivers 255 hp.
How much does the AGCO Massey Ferguson MF 7626 weigh?
The unladen weight is 8,050 kg.
What engine does the AGCO Massey Ferguson MF 7626 have?
6 cylinders, 7,400 cm³ displacement, Diesel.
How fast does the AGCO Massey Ferguson MF 7626 go?
Top speed is 40 km/h.
When was the AGCO Massey Ferguson MF 7626 built?
Production years: 2012–2015.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
