Start › Tractors › AGCO Massey Ferguson › 7600 series › MF 7614

AGCO Massey Ferguson MF 7614

Built: 2012–2015 · Series: 7600 er - Reihe

More machines from model year 2012

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 7600er - Reihe series from AGCO Massey Ferguson includes the MF 7614. Production: 2012–2015. The engine delivers 130 hp (96 kW), has 6 cylinders, with a displacement of 6,600 cm³. Torque is 645 Nm. Rated speed is 2,100 rpm. The unladen weight is 6,580 kg. The wheelbase measures 2,870 mm. Top speed is 40 km/h. Lifting capacity is 7,100 kg. The tank holds 335 litres. Transmission: 16V / 16R. The engine is water-cooled. Tyres: front 380 / 85 R 28, rear 460 / 85 R 38. The fuel is diesel. PTO output is 115 hp. The linkage is category III. The PTO runs at 540/540E/1000/1000E rpm. The 7600 er - Reihe series covers 4 models. Rated output within it ranges from 130 to 255 hp; the MF 7614 sits at the bottom of that range with 130 hp. Its immediate neighbours are the MF 7620 above it with 185 hp. Unladen weight within it ranges from 6,580 to 8,050 kg; here the MF 7614 sits at the bottom of that range with 6,580 kg. 146 AGCO Massey Ferguson models across 33 series are on record.

AGCO Massey Ferguson 7600 series – large tractors from Beauvais: MF 7614 to 7626 with a six-cylinder, 6.6 to 7.4-litre displacement, 96 to 186 kW and 6,580 to 8,050 kg unladen weight

The 7600 series is a range of large field tractors from Massey Ferguson's French plant in Beauvais. Massey Ferguson has belonged to the AGCO group since 1994; the Beauvais plant was previously the site of independent French Massey-Ferguson production and still builds the brand's large series today. The four models MF 7614, 7620, 7624 and 7626 are staggered by rising power through the last two digits of their designation and all carry a six-cylinder diesel engine.

Read on 3 more paragraphs

The register lists 4 versions with 96 to 186 kW from six-cylinders with 6,600 to 7,400 cm³ displacement. Unladen weights range from 6,580 to 8,050 kg, and rated speeds lie between 2,100 and 2,200 rpm.

With outputs up to 186 kW, the 7600 series counts among the large field tractors for farms with high draft-power needs, such as tillage and work with heavy mounted implements. Competitors in this segment include John Deere, Case IH and Fendt. It is used mainly for tillage, sowing, transport work and powering trailed harvesting machinery.

When buying used, the operating hours on the six-cylinder, the condition of the lift hydraulics and PTO, the tightness of engine and transmission, and wear on the front axle and tyres on tractors with heavy field use all matter. Spare parts run through the AGCO and Massey Ferguson dealer network. It is also worth checking the on-board electronics, cab mounting and seat suspension, and tyre tread depth.

Sources: SpecCodex register, model data: AGCO Massey Ferguson 7600er-Reihe, Massey Ferguson (AGCO, Hersteller)

Technical data

Engine

Fuel	dieselcorrect
Power	130 hp (96 kW)correct
Rated speed	2,100 rpmcorrect
Torque	645 Nmcorrect
Cylinders	6correct
Displacement	6,600 cm³correct
Cooling	water-cooledcorrect

Dimensions and weights

Wheelbase	2,870 mmcorrect
Unladen weight	6,580 kgcorrect

Drivetrain and chassis

Drive	four-wheel drivecorrect
Gearbox	16V / 16Rcorrect
Front tyres	380 / 85 R 28correct
Rear tyres	460 / 85 R 38correct
Top speed	40 km/hcorrect

Working data

Lifting capacity	7,100 kgcorrect
Fuel tank capacity	335 lcorrect

Other data

Linkage category	Cat IIIcorrect
PTO output	115 hpcorrect
PTO speed	540/540E/1000/1000Ecorrect

Where this model stands

Power-to-weight ratio: 14.6 kW/t (96 kW / 6.6 t)

Power class: Large (100–180 hp)

Stronger than 77% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the AGCO Massey Ferguson MF 7614 have?

The AGCO Massey Ferguson MF 7614 delivers 130 hp.

How much does the AGCO Massey Ferguson MF 7614 weigh?

The unladen weight is 6,580 kg.

What engine does the AGCO Massey Ferguson MF 7614 have?

6 cylinders, 6,600 cm³ displacement, Diesel.

How fast does the AGCO Massey Ferguson MF 7614 go?

Top speed is 40 km/h.

What is the PTO output of the AGCO Massey Ferguson MF 7614?

PTO output is 115 hp. PTO speeds: 540/540E/1000/1000E rpm.

How much does the rear linkage of the AGCO Massey Ferguson MF 7614 lift?

The rear linkage lifts 7,100 kg.

When was the AGCO Massey Ferguson MF 7614 built?

Production years: 2012–2015.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →