AGCO Allis 9435 – specifications
Built: 1994–1999 · Series: 9400 er - SERIE
With the 9435, AGCO Allis offers a model from the 9400er series. Production: 1994–1999. The engine delivers 137 hp (100.8 kW), has 6 cylinders, with a displacement of 7,605 cm³. The engine comes from Detroit Diesel. Torque is 577 Nm. Rated speed is 2,200 rpm. The machine is 4,560 mm long, 2,235 mm wide and 3,020 mm high. The unladen weight is 6,260 kg. The wheelbase measures 3,129 mm. Top speed is 30 km/h. The tank holds 288 litres. Transmission: 32 V/32 R. The engine is water-cooled. Tyres: front 11.00-16 ASF (4 WD: 14.9 R 28 AS), rear 18.4 R 38 AS. The model was built in USA. The fuel is diesel. The bore measures 116.5 mm. The stroke is 118.9 mm. The compression ratio is 15.8:1. Maximum torque is reached at 1,451 rpm. Construction: unit construction (no separate frame). The gearbox offers 32 forward gears. The linkage is category I/II. The PTO runs at 540/1000 rpm. Rated output across the AGCO Allis range ranges from 48 to 231 hp; the 9435 sits in the middle of that range with 137 hp. Its immediate neighbours are the 9630 below it with 135 hp and the 9745 above it with 147 hp. Rated output across the AGCO Allis range ranges from 40 to 231 hp; here the 9435 sits in the middle of that range with 135 hp. 58 AGCO Allis models across 14 series are on record.
Data for the version built 1994–1999 · Data origin: Reference work (Wikipedia/Wikibooks) · sources
More machines from model year 1994
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
AGCO Allis 9400 series – large six-cylinder tractors with Detroit Diesel engines, early 1990s: 100.8 to 115.5 kW/135 to 155 hp, 7,605 cm³ displacement, 6,260 to 6,285 kg unladen weight
The 9400 series held the top power class within the AGCO Allis brand of the early 1990s and, unlike the smaller AGCO Allis ranges, used six-cylinder engines from the American maker Detroit Diesel. In layout and cab the series was in line with the group's other large tractors of that period.
Read on 4 more paragraphs
The register lists here 2 versions with 100.8 to 115.5 kW, or 135 to 155 hp, from six-cylinders of 7,605 cm³ displacement, unladen weights from 6,260 to 6,285 kg, a length of 4,560 mm, a width of 2,235 mm, a height of 3,020 mm, and torque of 577 to 660 Nm at 2,200 rpm.
With its Detroit Diesel power the 9400 series differed technically from the other AGCO Allis ranges and targeted large arable farms that valued high pulling power in a classic standard-tractor layout. In 2001 AGCO dropped the AGCO Allis and AGCO White brands in favour of the corporate AGCO brand; the group had already acquired Massey Ferguson in 1994.
On used 9400s, the condition of the Detroit Diesel engine and its injection, tightness and shift behaviour of the gearbox, condition of the hydraulics, and rust on mudguards and frame count; engine parts run through the Detroit Diesel service network, the rest of the tractor through the AGCO parts trade. and the condition of the wiring loom.
With a rated output of roughly 100 to 115 kW, the 9400 series belonged to the upper standard-tractor class, with a rear three-point hitch to ISO 730 Category III and a standard dual-speed power take-off at 540 and 1,000 revolutions per minute for heavy tillage and harvesting implements. The turbocharged six-cylinder diesel predated the later European emissions stages with exhaust gas recirculation, particulate filters and SCR technology, which were only mandated for tractors of this class from the 2000s onward.
Sources: SpecCodex register, model data: AGCO Allis 9400er-Serie
Technical data
Engine
| Engine make | Detroit Dieselcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 137 hp (100.8 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 577 Nmcorrect |
| Speed at max. torque | 1,451 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 7,605 cm³correct |
| Bore | 116.5 mmcorrect |
| Stroke | 118.9 mmcorrect |
| Compression ratio | 15.8correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,560 mmcorrect |
|---|---|
| Width | 2,235 mmcorrect |
| Height | 3,020 mmcorrect |
| Wheelbase | 3,129 mmcorrect |
| Unladen weight | 6,260 kgcorrect |
Drivetrain and chassis
| Drive | rear- and four-wheel drivecorrect |
|---|---|
| Gearbox | 32 V/32 Rcorrect |
| Forward gears | 32correct |
| Front tyres | 11.00-16 ASF (4 WD: 14.9 R 28 AS)correct |
| Rear tyres | 18.4 R 38 AScorrect |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 288 lcorrect |
|---|
Origin and approval
| Plant | USAcorrect |
|---|---|
| Construction | unit construction (no separate frame)correct |
Other data
| Linkage category | Cat I/IIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Frequently asked questions
Where this model stands
Power-to-weight ratio: 16.1 kW/t (101 kW / 6.3 t)
Power class: Large (100–180 hp)
Stronger than 80% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 32 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.