Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Aebi › TT 241

Aebi TT 241

Built: 2016 · Series: TT

More machines from model year 2016

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TT 241 from Aebi is part of the TT series. Production: 2016. The engine delivers 75 hp (55 kW), has 4 cylinders, with a displacement of 2,970 cm³. Torque is 310 Nm. Rated speed is 2,600 rpm. The machine is 4,090 mm long, 2,110 mm wide and 2,220 mm high. The unladen weight is 2,800 kg. Transmission: continuously variable Hydrostatisch. The engine is water-cooled. The fuel is diesel. The TT series covers 6 models. Rated output within it ranges from 49 to 109 hp; the TT 241 sits in the middle of that range with 75 hp. Its immediate neighbours are the TT 211 below it with 72 hp and the TT 270 above it with 95 hp. Unladen weight within it ranges from 1,800 to 2,850 kg; here the TT 241 sits at the top of that range with 2,800 kg. 72 Aebi models across 16 series are on record.

Aebi TT (Terratrac) – Swiss slope transporter from Burgdorf: TT 80 to TT 281, four-cylinder diesels rated 36–80 kW, low centre of gravity for steep terrain

Aebi's TT line is the Terratrac family from the Swiss maker in Burgdorf, specialised in transport work and light draft work in mountain and slope terrain. Aebi was founded in 1883 and developed the Terratrac concept as vehicles with a low centre of gravity, four-wheel drive and a swivelling driver's seat for work on steep slopes; the TT type designation stands for Terratrac, with the following number marking the model step. From the TT 80 as the smallest to the TT 281 as the most powerful model, the line covers a wide power range for grassland, transport and municipal work.

Read on 3 more paragraphs

The register lists 6 versions rated at 36 to 80 kW (49 to 109 hp) from four-cylinder diesel engines of 2,615 to 2,970 cm³, torque of 170 to 310 Nm at 2,600 to 2,700 rpm, kerb weights of 1,800 to 2,850 kg, and a length of 3,440 to 4,090 mm, a width of 1,880 to 2,110 mm and a height of 2,070 to 2,220 mm.

TT vehicles are mainly found in Switzerland, Austria and the mountain regions of southern Germany, where they work land too steep for conventional tractors; typical tasks are hay and grass harvesting, transport work and winter service with attachments. Competition comes chiefly from the Austrian makers Reform and Lindner.

On a used Terratrac, check the condition of the engine and drivetrain, the articulation bearing of the folding chassis, the hydraulic pump and cylinders, and the brakes and tyres; given slope use, it is worth carefully checking the frame and implement mounts for cracking. Aebi supplies spares through its own dealer network in Switzerland and Austria.

Sources: SpecCodex register, model data: Aebi TT, Aebi (Hersteller, Burgdorf)

Technical data

Engine

Fueldieselcorrect
Power75 hp (55 kW)correct
Rated speed2,600 rpmcorrect
Torque310 Nmcorrect
Cylinders4correct
Displacement2,970 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,090 mmcorrect
Width2,110 mmcorrect
Height2,220 mmcorrect
Unladen weight2,800 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearboxcontinuously variable Hydrostatischcorrect

Where this model stands

Power-to-weight ratio: 19.6 kW/t (55 kW / 2.8 t)

Power class: Universal (40–100 hp)

Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Aebi TT 241 have?

The Aebi TT 241 delivers 75 hp.

How much does the Aebi TT 241 weigh?

The unladen weight is 2,800 kg.

What engine does the Aebi TT 241 have?

4 cylinders, 2,970 cm³ displacement, Diesel.

What are the dimensions of the Aebi TT 241?

4,090 mm × 2,110 mm × 2,220 mm.

When was the Aebi TT 241 built?

Production years: 2016.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare