Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Aebi › TP48P

Aebi TP48P

Series: TP

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Aebi TP48P is a model in the TP series. The engine delivers 75.3 hp (55.4 kW), has 4 cylinders, with a displacement of 3,331 cm³. The machine is 4,625 mm long, 2,466 mm wide and 2,337 mm high. The unladen weight is 2,300 kg. The wheelbase measures 2,750 mm. Top speed is 40 km/h. The engine is water-cooled. The fuel is diesel. The gearbox offers 16 forward gears. There are also 16 reverse gears. Rated output across the Aebi range ranges from 4.5 to 109 hp; the TP48P sits in the upper part of that range with 75.3 hp. Its immediate neighbours are the TT 241 below it with 75 hp and the TP88 above it with 83 hp. Rated output across the Aebi range ranges from 7 to 109 hp; here the TP48P sits in the upper part of that range with 75.3 hp. 72 Aebi models across 16 series are on record.

Aebi TP – four-wheel-drive transporters from Burgdorf for mountain terrain: four-cylinder diesel with 55.4 to 70 kW/75.3 to 95 hp, 3,000 to 3,331 cm³ displacement, 2,300 to 2,400 kg unladen weight

The Aebi Transporter, or TP, is alongside the single-axle tractors the second large range of Aebi & Co. AG Maschinenfabrik in Burgdorf: a low-slung, four-wheel-drive utility vehicle for transport on steep and difficult terrain in agriculture, forestry and municipal service. The TP added to the line-up a vehicle with a load platform and low centre of gravity for slopes where conventional trucks can no longer drive safely. In alpine farming and viticulture on steep slopes the Transporter has established itself over decades as an indispensable working tool.

Read on 3 more paragraphs

The register lists here 2 versions with 55.4 to 70 kW, or 75.3 to 95 hp, from four-cylinders of 3,000 to 3,331 cm³ displacement, unladen weights from 2,300 to 2,400 kg, a length of 4,625 mm, a width of 2,050 to 2,466 mm, a height of 2,330 to 2,337 mm, and a rated speed of 2,600 rpm.

The Aebi Transporter is regarded in Switzerland, Austria and southern Germany as the standard vehicle for material transport on steep ground and is used equally by farms, forestry businesses and municipalities, where it replaces a tractor and trailer on difficult terrain.

On a used Aebi TP, condition of the four-wheel drive and differential locks, tightness and function of the hydrostatic drive, condition of brakes and tyres, and rust on frame and load platform count; parts run through the Aebi dealer network.

Sources: SpecCodex register, model data: Aebi TP

Technical data

Engine

Fueldieselcorrect
Power75.3 hp (55.4 kW)correct
Cylinders4correct
Displacement3,331 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,625 mmcorrect
Width2,466 mmcorrect
Height2,337 mmcorrect
Wheelbase2,750 mmcorrect
Unladen weight2,300 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
GearboxSynchronisiertes 4-Gang-Reversiergetriebecorrect
Forward gears16correct
Reverse gears16correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 24.1 kW/t (55 kW / 2.3 t)

Power class: Universal (40–100 hp)

Stronger than 52% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Aebi TP48P have?

The Aebi TP48P delivers 75.3 hp.

How much does the Aebi TP48P weigh?

The unladen weight is 2,300 kg.

What engine does the Aebi TP48P have?

4 cylinders, 3,331 cm³ displacement, Diesel.

How fast does the Aebi TP48P go?

Top speed is 40 km/h.

What are the dimensions of the Aebi TP48P?

4,625 mm × 2,466 mm × 2,337 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare