Aebi CC 46
Series: CC
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Aebi CC 16 to CC 110 – the Combicut single-axle mowers from Burgdorf: CC for Combicut, the number as size and equipment step, single- and twin-cylinder petrol engines of 270 to 570 cm³, 6 to 13 kW, 124 to 298 kg
The Combicut is Aebi's single-axle mower – the machine with which the maker from Burgdorf in the canton of Bern has mown the mountain meadows of Switzerland and Austria since the 1950s where no tractor can stand: a single-axle unit with cutter bar, guided by handlebars, that travels slopes of over 100 percent gradient on spiked wheels or dual tyres. The type logic: CC stands for Combicut, the number orders size and equipment in ascending order – CC 16 and CC 26 the small mowers for embankments and orchard meadows, CC 36, CC 46 and CC 56 the mid-range with hydrostatic drive, CC 66 and CC 110 the big models with active steering and twin-cylinder engine that are guided one-handed on the slope. The engines are single- and twin-cylinder petrol engines as usual in this class, of 270 to 570 cm³ – air-cooled, slope-capable through oil supply in every position.
Read on 3 more paragraphs
The register lists 14 versions with 5.9 to 13.2 kW from single- and twin-cylinders of 270 to 570 cm³ and weights from 124 to 298 kg.
The single-axle mower is indispensable in alpine farming and road maintenance; Aebi competes with Rapid, Reform and Brielmaier, and the Combicut is regarded as the reference for slope capability.
On used machines, operating hours, engine condition (compression, carburettor), hydrostat and clutch, cutter bar and knife drive, handlebar adjustment and tyres count; parts run through Aebi Schmidt dealers.
Sources: SpecCodex register, model data: Aebi CC, Aebi Schmidt (Hersteller, Burgdorf)
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.