Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Aebi › CC46

Aebi CC46

Built: 2009–2014 · Series: CC

More machines from model year 2009

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the CC46, Aebi offers a model from the CC series. Production: 2009–2014. The engine delivers 14 hp (10.3 kW), has 2 cylinders, with a displacement of 480 cm³. The unladen weight is 298 kg. Top speed is 10 km/h. The engine is air-cooled. Tyres: front 23x8,50–12. The fuel is petrol. The CC series covers 14 models. Rated output within it ranges from 8 to 18 hp; the CC46 sits in the upper part of that range with 14 hp. Its immediate neighbours are the CC56 below it with 13 hp and the CC66 above it with 18 hp. Unladen weight within it ranges from 124 to 298 kg; here the CC46 sits at the top of that range with 298 kg. 72 Aebi models across 16 series are on record.

Aebi CC 16 to CC 110 – the Combicut single-axle mowers from Burgdorf: CC for Combicut, the number as size and equipment step, single- and twin-cylinder petrol engines of 270 to 570 cm³, 6 to 13 kW, 124 to 298 kg

The Combicut is Aebi's single-axle mower – the machine with which the maker from Burgdorf in the canton of Bern has mown the mountain meadows of Switzerland and Austria since the 1950s where no tractor can stand: a single-axle unit with cutter bar, guided by handlebars, that travels slopes of over 100 percent gradient on spiked wheels or dual tyres. The type logic: CC stands for Combicut, the number orders size and equipment in ascending order – CC 16 and CC 26 the small mowers for embankments and orchard meadows, CC 36, CC 46 and CC 56 the mid-range with hydrostatic drive, CC 66 and CC 110 the big models with active steering and twin-cylinder engine that are guided one-handed on the slope. The engines are single- and twin-cylinder petrol engines as usual in this class, of 270 to 570 cm³ – air-cooled, slope-capable through oil supply in every position.

Read on 3 more paragraphs

The register lists 14 versions with 5.9 to 13.2 kW from single- and twin-cylinders of 270 to 570 cm³ and weights from 124 to 298 kg.

The single-axle mower is indispensable in alpine farming and road maintenance; Aebi competes with Rapid, Reform and Brielmaier, and the Combicut is regarded as the reference for slope capability.

On used machines, operating hours, engine condition (compression, carburettor), hydrostat and clutch, cutter bar and knife drive, handlebar adjustment and tyres count; parts run through Aebi Schmidt dealers.

Sources: SpecCodex register, model data: Aebi CC, Aebi Schmidt (Hersteller, Burgdorf)

Technical data

Engine

Fuelpetrolcorrect
Power14 hp (10.3 kW)correct
Cylinders2correct
Displacement480 cm³correct
Coolingair-cooledcorrect

Dimensions and weights

Unladen weight298 kgcorrect

Drivetrain and chassis

Front tyres23x8, 50–12correct
Top speed10 km/hcorrect

Where this model stands

Power-to-weight ratio: 34.6 kW/t (10 kW / 0.3 t)

Power class: Compact (< 40 hp)

Stronger than 3% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Aebi CC46 have?

The Aebi CC46 delivers 14 hp.

How much does the Aebi CC46 weigh?

The unladen weight is 298 kg.

What engine does the Aebi CC46 have?

2 cylinders, 480 cm³ displacement, Benzin.

How fast does the Aebi CC46 go?

Top speed is 10 km/h.

When was the Aebi CC46 built?

Production years: 2009–2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare