Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Aebi › AM › AM 40

Aebi AM 40

Built: 1970–1986 · Series: AM

More machines from model year 1970

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AM 40 from Aebi is part of the AM series. Production: 1970–1986. The engine delivers 10 hp (7.4 kW), has 1 cylinder, with a displacement of 400 cm³. Rated speed is 846 rpm. The unladen weight is 290 kg. Top speed is 10.65 km/h. The fuel is petrol. Construction: (Einachser). The gearbox offers 3 forward gears. There are also 1 reverse gears. The AM series covers 24 models. Rated output within it ranges from 4.5 to 14 hp; the AM 40 sits in the middle of that range with 10 hp. Its immediate neighbours are the AM 9 below it with 9.5 hp and the AM 41 above it with 11 hp. Unladen weight within it ranges from 110 to 364 kg; here the AM 40 sits in the upper part of that range with 290 kg. 72 Aebi models across 16 series are on record.

Aebi AM – the Swiss motor mowers from Burgdorf: two-wheel tractors AM 7 to AM 90, 3 to 10 kW, for hillside meadows and mountain farms

AM stands for Aebi Motormäher: the two-wheel tractors with which Aebi of Burgdorf in the canton of Bern has mown the mountain meadows of Switzerland, Austria and southern Germany since the 1950s. Aebi had built farm machinery since 1883 and with the motor mower became the embodiment of alpine farm technology – where no tractor can stand, an AM mows across the slope with a cutter bar. The range covers small machines such as the AM 7, 8, 9 and 10 with single-cylinder petrol engines, the medium AM 15 to AM 42 and the large AM 50 to AM 90 of the 1970s and 1980s, which also received diesels and served as transporters with a trailer. Later Aebi continued the programme as the CC series (Combicut).

Read on 3 more paragraphs

The type number rises with size and output. In the register the models run from 3.3 to 10.3 kW (7 to 14 hp), 212 to 550 cm³ with one or two cylinders and weights from 110 to 320 kg; 15 of the 18 models with a fuel entry run on petrol, three optionally on diesel. The engines came from suppliers such as MAG, Hirth, Bernard and later Kubota and Lombardini.

The motor mower is a tool carrier: cutter bar for mowing, belt rake, hay pusher, snow blower, plough, load platform and trailer hitch swap on the same PTO. Aebi's 'Hang' (slope) suffix meant differential lock, cage wheels and a low centre of gravity for inclines up to 40 degrees.

Used old AMs are common and cheap, good examples with attachments sought after. When buying, engine condition (compression, ignition on magneto types), gearbox and clutch, the mower with knife and fingers and the cage or lug wheels are what count.

Sources: SpecCodex register, model data: Aebi AM, Aebi Schmidt (manufacturer), Aebi Schmidt (Wikipedia)

Technical data

Engine

Fuelpetrolcorrect
Power10 hp (7.4 kW)correct
Rated speed846 rpmcorrect
Cylinders1correct
Displacement400 cm³correct

Dimensions and weights

Unladen weight290 kg (with cutter bar)correct

Drivetrain and chassis

Drivesingle-axle drivecorrect
Gearbox3/1-Getriebecorrect
Forward gears3correct
Reverse gears1correct
Top speed10.65 km/hcorrect

Origin and approval

Construction(Einachser)correct

Where this model stands

Power-to-weight ratio: 25.5 kW/t (7 kW / 0.3 t)

Power class: Compact (< 40 hp)

Stronger than 1% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Aebi AM 40 have?

The Aebi AM 40 delivers 10 hp.

How much does the Aebi AM 40 weigh?

The unladen weight is 290 kg.

What engine does the Aebi AM 40 have?

1 cylinders, 400 cm³ displacement, Benzin.

How fast does the Aebi AM 40 go?

Top speed is 10.7 km/h.

When was the Aebi AM 40 built?

Production years: 1970–1986.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare