StartTrailersStehmann › 3 Achs

Stehmann 3 Achs

Built: 2019 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Stehmann 3 Achs rolled off the line in 2019 as a trailer.

Technical data

Other data

Achsen-Konfiguration3 Achsencorrect
AusstattungABS, Druckluftbremsecorrect
FederungLuftcorrect
Gesamtgewicht30,000 kgcorrect
Hinterreifengröße235 /75 R17,5correct
Laderaumlänge10,500 mmcorrect
Leergewicht5,560 kgcorrect
Maximales Ladegewicht24,440 kgcorrect
Reifengröße235 /75 R17,5correct
Vorderreifengröße235 /75 R17,5correct

Frequently asked questions

When was the Stehmann 3 Achs built?

Production years: 2019.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 5 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Used equipment offers
19 current listings for Stehmann 3 Achs on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3] [4] [5]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare