Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Vang › Other models

Vang Other models

4 models in this series

Vang: EU class O4 heavy-haulage trailer with a 111,000 kg gross weight, 18,550 mm length and 3,150 mm width requiring a special abnormal-load permit

With a gross vehicle weight of 111,000 kg, this trailer from Vang falls into EU trailer class O4, the very top of the heavy-trailer and semi-trailer range used in heavy and abnormal-load haulage.

Read on 3 more paragraphs

It has an unladen weight of 12,840 kg, giving a payload of around 98,160 kg at full gross weight. At a length of 18,550 mm and a width of 3,150 mm, it clearly exceeds the 2.55 m width permitted on public roads without a special permit, placing it in the abnormal-load category that requires a permit.

Trailers of this size carry single, indivisible loads such as transformers, wind-turbine components or construction-machinery parts that cannot be split across several journeys. Journeys at this width require a special permit under the relevant national rules for abnormal and heavy loads, often with escort vehicles and route checks. Spare parts for brake drums or discs, suspension components and lighting are available through the general parts trade for this vehicle class, independent of the original manufacturer.

When buying used, the main chassis and axle assemblies deserve particular attention, since at this weight class any deformation is a safety issue. The checklist should include the air brake system with all lines and valves, tyre condition, and any steered axles, hydraulic or mechanical, fitted to the trailer. Checking the lashing points for wear and cracking is equally important.

Sources: SpecCodex-Register: Kennwerte des Modells Vang

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare