Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Vang › KL 11

Vang KL 11

Built: 2000 · Series: Other models

More machines from model year 2000

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Vang KL 11 is a machine built by Vang. Production: 2000. The machine is 8,102 mm long and 2,480 mm wide. The unladen weight is 3,200 kg. The gross vehicle weight is 21,000 kg. Unladen weight across the Vang range ranges from 3,200 to 12,840 kg; the KL 11 sits at the bottom of that range with 3,200 kg. Its immediate neighbours are the SLL2-2CH above it with 5,760 kg. 4 Vang models are on record.

Vang: EU class O4 heavy-haulage trailer with a 111,000 kg gross weight, 18,550 mm length and 3,150 mm width requiring a special abnormal-load permit

With a gross vehicle weight of 111,000 kg, this trailer from Vang falls into EU trailer class O4, the very top of the heavy-trailer and semi-trailer range used in heavy and abnormal-load haulage.

Read on 3 more paragraphs

It has an unladen weight of 12,840 kg, giving a payload of around 98,160 kg at full gross weight. At a length of 18,550 mm and a width of 3,150 mm, it clearly exceeds the 2.55 m width permitted on public roads without a special permit, placing it in the abnormal-load category that requires a permit.

Trailers of this size carry single, indivisible loads such as transformers, wind-turbine components or construction-machinery parts that cannot be split across several journeys. Journeys at this width require a special permit under the relevant national rules for abnormal and heavy loads, often with escort vehicles and route checks. Spare parts for brake drums or discs, suspension components and lighting are available through the general parts trade for this vehicle class, independent of the original manufacturer.

When buying used, the main chassis and axle assemblies deserve particular attention, since at this weight class any deformation is a safety issue. The checklist should include the air brake system with all lines and valves, tyre condition, and any steered axles, hydraulic or mechanical, fitted to the trailer. Checking the lashing points for wear and cracking is equally important.

Sources: SpecCodex-Register: Kennwerte des Modells Vang

Technical data

Dimensions and weights

Length8,102 mmcorrect
Width2,480 mmcorrect
Unladen weight3,200 kgcorrect
Gross vehicle weight21,000 kgcorrect

Frequently asked questions

How much does the Vang KL 11 weigh?

The unladen weight is 3,200 kg.

What is the gross vehicle weight of the Vang KL 11?

21,000 kg.

What are the dimensions of the Vang KL 11?

8,102 mm × 2,480 mm.

When was the Vang KL 11 built?

Production years: 2000.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare