Unihef Other models
2 models in this series
Unihef – other models: the collective page with the CH and the U C D, four-cylinder engine, kerb weights 1,820 to 2,056 kg, gross vehicle weight 3,200 kg, widths 2,440 to 2,460 mm
This page gathers the Unihef models the register could not assign to a named series: the CH and the U C D. Both models appear in the register as short letter codes, as used by smaller chassis and body builders instead of spelled-out model names; such codes usually stood for a specific combination of chassis type, cab shape and body variant within a limited modular range.
Read on 3 more paragraphs
The register lists 2 versions here with a four-cylinder engine, kerb weights from 1,820 to 2,056 kg, a gross vehicle weight of 3,200 kg and widths of 2,440 to 2,460 mm.
At a width of around 2.45 metres and a gross weight of 3.2 tonnes, this is a wide chassis suited to its payload, used for bodies needing greater loading width, for instance in municipal or distribution work; the width, beyond the usual 2.2 to 2.3 metres of many series-built chassis, points to a purpose-widened frame or twin rear wheels.
When buying used, check corrosion on the frame and body, the condition of the engine and gearbox, the function of brakes and suspension under regular loads close to the gross vehicle weight, the condition of the axles and tyres given the unusually wide track, and the general service history; parts for such a chassis are usually available through independent commercial-vehicle workshops.
Sources: SpecCodex register, model data: Unihef (weitere Modelle)
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
