SAME Deutz Fahr Agrotron 400 - Reihe
1 model in this series
SAME Deutz Fahr Agrotron 410 (2011-2013): water-cooled four-cylinder standard tractor with 84 kW output, B100 biodiesel capability and 521 Nm of torque
The Agrotron 410 was built between 2011 and 2013 as part of the Agrotron 400 series under the SAME Deutz Fahr brand and belonged to the more powerful standard tractors of this group in the corresponding period.
Read on 3 more paragraphs
The water-cooled four-cylinder engine displaces 4,038 cm³ and delivers 84 kW at 2,100 rpm, equivalent to 114 horsepower, with 521 Nm of torque. The engine is approved for both conventional diesel and pure biodiesel to the B100 standard. With a weight of 5,340 kg, a wheelbase of 2,419 mm, a width of 2,550 mm and a top speed of 40 km/h, the Agrotron 410 was built for heavy drawbar work and brisk road travel.
Torque of 521 Nm at just over four litres of displacement provides strong pulling reserves for heavy tillage equipment, while the width of 2,550 mm points to an above-average, stable track for a standard tractor. B100 approval widens fuel choice for holdings with their own vegetable oil production.
When buying a used Agrotron 410, the turbocharger and intercooler should be checked for loss of power, since these components are heavily stressed under full load on such a high-torque four-cylinder engine. The fuel system also deserves a check for signs of biodiesel use, as this ages certain seals differently than fossil diesel. A look at the wide rear tyres for uneven wear is also worthwhile, since the tractor's above-average track width can mask misalignment if left unchecked for years.
Sources: SpecCodex-Register: Kennwerte des Modells Agrotron 410
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
