Renault/jegger Other models
1 model in this series
Renault Master with a body by Jegger: four-cylinder engine of 2,299 cm³, 3,500 kg maximum gross weight, 4.33 m wheelbase and a top speed of 160 km/h
The basis of this vehicle is the Renault Master, a light commercial vehicle from the French manufacturer Renault, built for many years as a panel van, dropside and bare chassis for conversions. The register lists not Renault itself as the brand, but the body builder Jegger, who fitted the chassis with its own body. The recorded registrations span 2022 to 2023.
Read on 3 more paragraphs
The engine has four cylinders and a displacement of 2,299 cm³. With a maximum gross weight of 3,500 kg and an unladen weight of 2,705 kg, the payload comes to around 795 kg. Length is 7.30 m, wheelbase 4.33 m and width 2.35 m, with a top speed of 160 km/h. The ratio of unladen weight to payload sits in the middle range one would expect from a regularly used box body of this size.
At a maximum gross weight of 3,500 kg, the vehicle falls into EU class N1 and can be driven in most European countries on a category B licence. Vehicles in this class are subject to the rules for light commercial vehicles rather than the stricter requirements for trucks above 3.5 t. The 4.33 m wheelbase leaves room for a voluminous body without exceeding the permitted axle loads.
Buying a used example like this means checking two separate areas: the chassis with its engine, gearbox and brakes as on any Master, and Jegger's own body with its own wiring, seals and frame mounting. Corrosion where chassis and body meet, leaking body seams and added wiring deserve particular attention, as does the condition of the brakes on a vehicle often driven close to its permitted payload in daily use.
Sources: SpecCodex-Register: Kennwerte des Modells Renault Master (Jegger)
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
