Renault/its System Other models
1 model in this series
Renault Master with a body by ITS System: four-cylinder engine of 2,299 cm³, 3,500 kg maximum gross weight, 4.33 m wheelbase and a top speed of 160 km/h
The basis of this vehicle is the Renault Master, a light commercial vehicle from the French manufacturer Renault, built for many years as a panel van, dropside and bare chassis for conversions. The register lists not Renault itself as the brand, but the body builder ITS System, who fitted the chassis with its own body. The recorded registrations span 2022 to 2024.
Read on 3 more paragraphs
The engine has four cylinders and a displacement of 2,299 cm³. With a maximum gross weight of 3,500 kg and an unladen weight of 2,795 kg, the payload comes to around 705 kg. Length is 7.30 m, wheelbase 4.33 m and width 2.32 m, with a top speed of 160 km/h. The comparatively high unladen weight paired with a long wheelbase points to a solid, fairly heavy body.
At a maximum gross weight of 3,500 kg, the vehicle falls into EU class N1 and can be driven in most European countries on a category B licence. Vehicles in this class are subject to the rules for light commercial vehicles rather than the stricter requirements for trucks above 3.5 t. The limited top speed of 160 km/h on such a heavy body is no accident; it follows from a design aimed at stability rather than outright performance.
Buying a used example like this means checking two separate areas: the chassis with its engine, gearbox and brakes as on any Master, and ITS System's own body with its own wiring, seals and frame mounting. Corrosion where chassis and body meet and the condition of the brakes deserve particular attention, since the unladen weight alone already uses up a large share of the permitted gross weight.
Sources: SpecCodex-Register: Kennwerte des Modells Renault Master (ITS System)
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
