Nta Other models
2 models in this series
Nta – other models: the collective page of trailers outside the named ranges, type codes 310-8.2-26T and K-310-10.40-26T, 4,800 to 7,150 kg unladen weight, 28,000 to 30,000 kg gross weight
This page gathers the Nta trailers the register could not assign to a named range – with only two versions this amounts to the whole programme listed here. The types 310-8.2-26T and K-310-10.40-26T carry technical combination codes rather than proper model names, with no generally known system readable from them. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 4,800 to 7,150 kg, gross weights from 28,000 to 30,000 kg, lengths from 7,650 to 10,750 mm and widths from 2,500 to 2,580 mm.
With gross weights of 28 to 30 tonnes, both versions sit well above the ten-tonne mark and fall into the heaviest trailer class, typical of semi-trailers and tandem-axle trailers in heavy-haul and construction traffic behind suitably rated tractor units; driving such combinations requires a category CE licence.
On a used example at this weight class, the condition of axles, brake system and linkage, rust on frame and side rails, the state of the fifth-wheel coupling or tow eye, and tyres and rims all count in particular; the payload reserve of over twenty tonnes between unladen and gross weight calls for a correspondingly robust and well-maintained brake system. Parts for such small brands usually run through independent commercial-vehicle workshops rather than a maker's network.
Sources: SpecCodex register, model data: Nta (weitere Modelle)
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
