Mrauto Other models
1 model in this series
Sprinter box body with a four-cylinder diesel, 1.95-litre displacement: 2,657 kg kerb weight and 843 kg of payload at a 3,500 kg gross vehicle weight
This vehicle, too, uses the Mercedes-Benz Sprinter chassis as its base. As with most bodies on this platform, the specific version comes from a converter who designs the box body or load bed to its customers' requirements, while the base vehicle remains unchanged by the vehicle manufacturer.
Read on 3 more paragraphs
The four-cylinder diesel engine with 1,950 cm³ displacement powers a vehicle with a 2,657 kg kerb weight, which allows 843 kg of payload at a 3,500 kg gross vehicle weight. At 7,090 mm long, 2,320 mm wide and with a 4,330 mm wheelbase, the body sits in the mid-length range of the platform, neither particularly short nor unusually long.
At a gross vehicle weight of 3,500 kg, the vehicle falls into EU category N1 and can be driven on a category B licence. The medium body length and payload well above 800 kg suit classic distribution traffic with palletised or loose goods, without the vehicle's length or weight already pushing against the limits typical of this class.
When buying a used Sprinter box body of this size, it is worth checking the load compartment lining for damage from load-securing equipment as well as the rear door seals, which wear out early under frequent loading and unloading. The condition of the tow hitch, if fitted, and its wiring should also be checked.
Sources: SpecCodex-Register: Kennwerte des Modells SPRINTER
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
