Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Mobilchef › Other models

Mobilchef Other models

4 models in this series

Mobilchef – other models: the collective page of trailers outside the named ranges, with the centre-axle trailer and the versions 1AT, 1MC99 and 2MC99, unladen weights from 1,100 to 2,600 kg, gross weights up to 3,500 kg

Mobilchef 2MC99
Pictured: Mobilchef 2MC99

This page gathers the Mobilchef trailers the register could not assign to a named range: the versions 1AT, 1MC99 and 2MC99 and a model listed in the register as Centre Axle Trailer – a centre-axle trailer in which the axle or axle group sits near the middle of the load bed rather than at the rear as on classic car trailers. This design shifts part of the load onto the tow hitch of the towing vehicle and is common on trailers for long, awkward loads.

Read on 3 more paragraphs

The register lists here 4 versions with unladen weights from 1,100 to 2,600 kg, gross weights from 1,500 to 3,500 kg, lengths from 4,190 to 8,400 mm and widths from 2,030 to 2,420 mm.

With gross weights up to 3.5 tonnes, these trailers sit in the class that can be towed on a category B licence without a separate trailer entitlement, covering the range from the private transport trailer to the commercially used centre-axle trailer for long but light loads. On the used market, such trailers often change hands within a few years, mostly between private users and small trade or landscaping businesses.

On a used trailer, the condition of chassis and load bed, axle and suspension, overrun brake and brake linings, tow eye and jockey wheel, the condition of tyres and lighting, and a complete registration history count, as well as the tow hitch on the towing vehicle and the breakaway cable; spare parts for axles, brakes and lighting are available through the general trailer-parts trade.

Sources: SpecCodex register, model data: Mobilchef (weitere Modelle)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare