Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › McCormick › FARMALL D-LINIE

McCormick FARMALL D-LINIE

3 models in this series

The FARMALL D-LINIE series from McCormick comprises 3 models.

McCormick Farmall D line – the DED 3, DGD 4 and DLD 2 models built at the Neuss plant with two- to four-cylinder diesel engines, 10.3 to 22.1 kW and 1.1 to 2.2 litres of displacement

McCormick DLD 2
Pictured: McCormick DLD 2

The Farmall D line was launched in the 1950s at the International Harvester plant in Neuss on the Rhine and comprises the DED 3, DGD 4 and DLD 2 models. The designation follows a letter scheme from the IHC system: D stands for the diesel version, the second and third positions for build size and equipment, and the final digit for the cylinder count.

Read on 3 more paragraphs

The register lists 3 versions with 10.3 to 22.1 kW (14 to 30 hp) from two- to four-cylinders of 1,088 to 2,178 cc displacement at rated speeds between 1,750 and 1,800 rpm. Maximum torque ranges from 58 to 123 Nm. Operating weight ranges from 820 to 1,730 kg, length from 2,461 to 2,834 mm, width from 1,540 to 1,630 mm and height from 1,550 to 1,585 mm. All three models run on diesel.

With the D line, International Harvester set up its post-war European diesel programme for small and medium-sized farms, built specifically for the European market at the Rhineland plant in Neuss rather than imported from the US. The span from two- to four-cylinders thereby covered different farm sizes within a single shared range.

On a used purchase of these historic diesel tractors, points to check include the condition of the injection pump and nozzles, the tightness of the radiator and water pump, wear on the clutch and gearbox, and corrosion on the chassis and sheet-metal parts. Spare parts for the D line are found through vintage dealers specialising in International Harvester.

Sources: SpecCodex register, model data: McCormick Farmall D-Linie

Models compared

3 of 3 models.

DED 32/1953–1956 DGD 41953–1956 DLD 21953–1956
Power 14.7 kW 22.1 kW 10.3 kW
Rated speed 1,750 rpm 1.750/1.800 rpm 1,750 rpm
Linkage category Cat I Cat I Cat I
Cylinders 3 4 2
Displacement 1,631 cm³ 2,178 cm³ 1,088 cm³
Torque 81 Nm 123 Nm 58 Nm
Fuel tank capacity – 39 l 18 l
Top speed 21 km/h 20 km/h 19 km/h
Wheelbase 1,676 mm 1,778 mm 1,575 mm
Length 2,732 mm 2,834 mm 2,461 mm
Width 1,630 mm 1,630 mm 1,540 mm
Height 1,585 mm 1,580 mm 1,550 mm
Unladen weight 1,230 kg 1,730 kg 820 kg

Models

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare