Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Leven › Other models

Leven Other models

2 models in this series

Leven LK58LPS: EU class O4 trailer with a permissible gross weight of 35,000 kg, unladen weight of 9,450 kg and payload of 25,550 kg at 13,800 mm length and 2,550 mm width

Leven LK58LPS
Pictured: Leven LK58LPS

The LK58LPS trailer from Leven is a heavy-duty unit: at a permissible gross weight of 35,000 kg it falls into EU trailer class O4, above 10 tonnes, the bracket in which trailers are hauled on long-distance routes behind semi-tractors and heavy trucks. Trailers of this size usually appear as flatbed, tipper or low-loader semi-trailers, moving construction machinery, bulk goods or general cargo over long distances.

Read on 3 more paragraphs

At a length of 13,800 mm and a width of 2,550 mm, the trailer has an unladen weight of 9,450 kg; against the permissible 35,000 kg that leaves a payload of 25,550 kg. The wheelbase between the outermost axles is 9,200 mm.

As a class O4 vehicle it is fitted with air brakes under EU rules, mandatory from this weight class upward. Towing it requires, depending on the tow vehicle, at least driving licence category C1E or CE. EU rules also require category A anti-lock braking (ABS) for trailers in classes O3 and O4, preventing the trailer from breaking away under braking.

A used-trailer check should start with the frame: corrosion at the axle mounts and cross members is the most common fault on this type. Add to that a function check of the air brake system including lines and brake chambers, tyre condition relative to load rating, play in the axle bearings, the condition of the towing eye or coupling, and a valid roadworthiness inspection. The check should also cover the suspension, the load floor for corrosion, matching of the chassis number to the documents, and the presence of load-securing lashing points.

Sources: SpecCodex-Register: Kennwerte des Modells LK58LPS

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare