Iveco/partner Other models
3 models in this series
Iveco/Partner – other models: a registry entry of light Iveco chassis in the 3.5-tonne class with a 3.0-litre four-cylinder engine, 2,655 to 2,740 kg kerb weight, 6,880 mm length
This page gathers the Iveco vehicles listed under the Partner designation that the register could not assign to a named range. The type names 35C18, 35S18 and 50C/35 follow Iveco's light-commercial logic; the gross weight of 3,500 kg recorded throughout confirms the 35 weight class even for the type listed as 50C/35, as seen on many independently registered Iveco chassis across Europe.
Read on 4 more paragraphs
The register lists 3 versions here with kerb weights from 2,655 to 2,740 kg at a gross weight of 3,500 kg, four-cylinder engines of 2,998 cm³, a length of 6,880 mm and widths from 2,230 to 2,370 mm.
A narrow spread of just 85 kg in kerb weight shows closely related versions of the same chassis and engine with a comparable body; the payload to the 3.5-tonne limit holds steady at around 800 kg, pointing to a single, largely unchanged body design across the registered examples.
In the Partner body as well, it is the Iveco Daily's ladder frame, unusual for this weight class, that allows heavy third-party bodies to be fitted directly onto the side rails, while most competitors here rely on a load-bearing body shell.
On used vehicles of this class, check rust on the frame and sills, the condition of the clutch and turbocharger, and how the body connects to the chassis; drivetrain parts come through the independent parts network for Iveco commercial vehicles.
Sources: SpecCodex register, model data: Iveco/Partner
Models compared
3 of 3 models.
| 35C182022 | 35S182021-2022 | 50C/352024 | |
|---|---|---|---|
| Cylinders | 4 | 4 | 4 |
| Displacement | 2,998 cm³ | 2,998 cm³ | 2,998 cm³ |
| Top speed | – | 160 km/h | 160 km/h |
| Wheelbase | 4,100 mm | 4,110 mm | 4,100 mm |
| Width | 2,320 mm | 2,370 mm | 2,230 mm |
| Unladen weight | 2,655 kg | 2,740 kg | 2,695 kg |
| Gross vehicle weight | 3,500 kg | 3,500 kg | 3,500 kg |
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
35C18
The Iveco/partner 35C18 is a vehicle built by Iveco/partner. Production: 2022. The engine has 4 cylinders, with a...
35S18
The 35S18 comes from Iveco/partner. Production: 2021-2022. The engine has 4 cylinders, with a displacement of 2,998...
50C/35
The Iveco/partner 50C/35 is a vehicle built by Iveco/partner. Production: 2024. The engine has 4 cylinders, with a...