Iveco/eukran Other models
1 model in this series
Iveco 70C18 – two-axle chassis on an Iveco Daily base, EU class N2: 3.0-litre four-cylinder engine, 7,200 kg gross weight and 4,750 mm wheelbase
This vehicle is based on an Iveco Daily chassis in the heavy 70-class weight bracket, used across Europe as a base for crane, loading and municipal bodies from independent bodybuilders. Two-axle chassis of this kind with high payload are favoured where a compact vehicle length has to be combined with a large payload.
Read on 3 more paragraphs
For the 70C18 the register lists a four-cylinder engine with a displacement of 2,998 cc. Kerb weight is 4,700 kg, gross vehicle weight 7,200 kg. The vehicle is 8,590 mm long, 2,350 mm wide and has a wheelbase of 4,750 mm, carried on four wheels. The design top speed is limited to 90 km/h.
At 7,200 kg gross weight the vehicle falls into EU vehicle class N2 for medium commercial vehicles. The 90 km/h limit applies generally to heavy commercial vehicles across the EU regardless of the body fitted. Chassis of this class frequently carry hydraulically powered equipment, whose weight reduces the payload reserve accordingly.
When buying a used example, check the condition of the rear axle and brakes under the extra load of any fitted equipment, the tightness of the hydraulic system, and rust on the frame and axle mountings. Chassis and drivetrain parts run through the Iveco dealer network, equipment and hydraulic parts through the respective equipment supplier. Door seals are worth checking too.
Sources: SpecCodex-Register: Kennwerte des Modells Iveco 70C18
Models
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.