Gromex Other models
2 models in this series
Gromex – other models: the collective page of trailers outside the named ranges, L2 and L3, 580 to 890 kg unladen weight, 3,000 to 3,500 kg gross weight
This page gathers the Gromex trailers the register could not assign to a named range – with only two types in the register, this amounts to practically the whole recorded catalogue. The designations L2 and L3 follow a simple numbering, with no further detail readable from them.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 580 to 890 kg, gross weights from 3,000 to 3,500 kg, lengths from 6,800 to 10,060 mm and widths from 2,130 to 2,410 mm.
With gross weights up to 3,500 kg, both versions fall into the braked trailer class towed behind vans and stronger cars. The length of up to over ten metres at only around 890 kg unladen points to very light-built, long bodies, for instance for boats or long, narrow loads.
On a used example, axle and wheel-bearing condition, the function of the overrun brake and its linkage, rust on frame and drawbar, and the state of lighting and plug all count. On the long versions, also check the frame for twist and the axle bearings. Parts for such small brands usually run through independent trailer workshops rather than a manufacturer network. For registration behind a car, besides the trailer's rated gross weight the tow vehicle's rated towing capacity is also decisive, since it sets the real limit for the load actually towed. Before buying, it is also worth checking the inspection and registration history to trace earlier repairs and the maintenance record.
Sources: SpecCodex register, model data: Gromex (weitere Modelle)
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
