Grandin Other models
2 models in this series
Grandin Dallas – other models: base and four-wheel-drive (4x4) versions, 1,360 cc four-cylinder engine, kerb weight 700 to 730 kg at a 1,070 kg gross vehicle weight
This collective page lists the Dallas line under the register name Grandin in two versions: a base version and a four-wheel-drive variant, listed in the register as Dallas 4x4. Both versions share the same 1,360 cc four-cylinder engine and differ mainly in the drivetrain – rear-wheel drive on the base version, selectable four-wheel drive on the 4x4 variant.
Read on 3 more paragraphs
The register lists 2 versions with a consistently 1,360 cc four-cylinder engine, kerb weights of 700 to 730 kg at a gross vehicle weight of 1,070 kg and a width of 1,630 mm.
With a kerb weight well under a tonne and a payload of around 340 to 370 kg, the line belongs to the light commercial vehicles of its class, of the kind used for smaller transport tasks in both commercial and private use. The four-wheel-drive variant extended the range of use to unpaved ground and light building-site terrain, while the base version was designed for on-road use with a limited payload.
When buying used, a vehicle this light calls above all for checking rust protection on the chassis, floor pan and body, the condition of the clutch and drivetrain, and, on the 4x4 version, the function of the transfer case and differentials. Spare parts for such a niche model are generally only available through specialists, used-parts markets or the open trade; there is no authorised dealer network.
Sources: SpecCodex register, model data: Grandin Dallas (weitere Modelle)
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
