Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Etarki › Other models

Etarki Other models

1 model in this series

Etarki ADAM – a commercial vehicle with a gross vehicle weight of 11,750 kg, wheelbase 4,070 mm, six wheels, top speed 90 km/h

Etarki ADAM
Pictured: Etarki ADAM

Etarki ADAM is a commercial vehicle from 1992 with a gross vehicle weight of 11,750 kg, placing it just under the 12-tonne threshold in the N2 class. Over a total length of 8,260 mm and a wheelbase of 4,070 mm, the ratio of wheelbase to length falls within the usual range for distribution vehicles.

Read on 3 more paragraphs

For this vehicle the register lists a kerb weight of 9,825 kg and a gross vehicle weight of 11,750 kg. The vehicle is 8,260 mm long and 2,550 mm wide, with six wheels and a wheelbase of 4,070 mm, and reaches a top speed of 90 km/h.

With a difference of only 1,925 kg between kerb weight and gross vehicle weight, a comparatively tight payload margin remains, pointing to a body that is already heavy in itself. Because the gross vehicle weight sits just under 12 tonnes, a category C licence was required for this vehicle once the 7.5-tonne threshold is crossed. Six wheels on three axles spread the high gross weight over a larger contact area than a two-axle vehicle of the same class.

For a used example, check the frame and all three axles for corrosion and wear, the condition of the air brake system, and the clutch and gearbox of the drivetrain. Given the tight payload margin, it is also worth checking the actual load carried, and depending on the body, its seals and the condition of fitted components, as well as even tyre wear across all six wheels.

Sources: SpecCodex-Register: Kennwerte des Modells Etarki ADAM

Models

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare