Elta Other models

The register lists here 3 versions with 0.75 to 1.1 kW, all four-pole, at 230/400 V or 400 V, with full-load efficiencies from 79.1 to 82.5% and at 75% load from 80.6 to 82.8%. Protection is uniformly IP55, frame size E90 or 90 S, mounting codes B3 and V30. China is recorded as the manufacturing country; testing followed the 2019 GEMS determination with test methods 2-1-1B and A; none of the tested motors reaches a High Efficiency classification under GEMS.

Motors in this power class under 1.5 kW and frame size around 90 are among the small standard motors used in fans, small pumps and simple conveying drives; registration under the Australian GEMS standard shows that Elta certifies this smaller motor range for the Australian market too.

When buying used or replacing, what matters is bearing condition and a checked insulation resistance of the winding, visible overheating marks on the terminal box and fan cover, and a legible nameplate with frame size and pole count; anyone wanting to run the motor on a variable-speed drive should check its inverter suitability beforehand. Spares run through Elta's sales channel.