Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › CZT › Other models

CZT Other models

5 models in this series

CZT – other models: the collective page of the Eendracht trailers outside the named ranges, Eendracht 2 and Eendracht 3, 330 to 630 kg unladen weight, lengths around 5,500 mm

This page gathers the CZT trailers the register could not assign to a named range. The line-up consists of the Eendracht 2 and Eendracht 3 types, where the digit denotes the fit-out level and the A suffix a further variant; the Dutch model name Eendracht points to the brand's Dutch-speaking home market.

Read on 3 more paragraphs

The register lists here 5 versions with unladen weights from 330 to 630 kg, gross weights from 1,060 to 2,000 kg, lengths from 5,520 to 5,540 mm and widths from 1,800 to 2,140 mm.

With lengths around 5.5 m against an unladen weight of only 330 to 630 kg, the Eendracht range ranks among the comparatively long but light trailers; such a ratio of length to weight is typical of trailers built to carry bulky but light loads such as boats, boat hulls or long building components.

On a used example of this type, the rust condition of the frame and drawbar along its full length, the condition of the overrun coupling, and the age and condition of the wheel bearings all count above all. On the larger Eendracht 3 versions with a higher gross weight, the function of the service brake should also be checked, and on the lighter Eendracht 2 types the load capacity of the support points for the cargo. Because the range uses the same basic length across several fit-out levels, the drawbar and frame parts can usually be swapped between the two Eendracht types.

Sources: SpecCodex register, model data: CZT (weitere Modelle), Zulassungsdaten RDW (Niederlande)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare