CZT EENDRACHT 2 A
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
CZT – other models: the collective page of the Eendracht trailers outside the named ranges, Eendracht 2 and Eendracht 3, 330 to 630 kg unladen weight, lengths around 5,500 mm
This page gathers the CZT trailers the register could not assign to a named range. The line-up consists of the Eendracht 2 and Eendracht 3 types, where the digit denotes the fit-out level and the A suffix a further variant; the Dutch model name Eendracht points to the brand's Dutch-speaking home market.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 330 to 630 kg, gross weights from 1,060 to 2,000 kg, lengths from 5,520 to 5,540 mm and widths from 1,800 to 2,140 mm.
With lengths around 5.5 m against an unladen weight of only 330 to 630 kg, the Eendracht range ranks among the comparatively long but light trailers; such a ratio of length to weight is typical of trailers built to carry bulky but light loads such as boats, boat hulls or long building components.
On a used example of this type, the rust condition of the frame and drawbar along its full length, the condition of the overrun coupling, and the age and condition of the wheel bearings all count above all. On the larger Eendracht 3 versions with a higher gross weight, the function of the service brake should also be checked, and on the lighter Eendracht 2 types the load capacity of the support points for the cargo. Because the range uses the same basic length across several fit-out levels, the drawbar and frame parts can usually be swapped between the two Eendracht types.
Sources: Kennwerte der Modelle CZT (weitere Modelle), RDW (Niederlande)
Technical data
Dimensions and weights
| Width | 1,800 mmcorrect |
|---|---|
| Unladen weight | 350 kgcorrect |
| Gross vehicle weight | 1,250 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the CZT EENDRACHT 2 A weigh?
The unladen weight is 350 kg.
What is the gross vehicle weight of the CZT EENDRACHT 2 A?
1,250 kg.
Up to what speed is the CZT EENDRACHT 2 A approved?
Approved up to 100 km/h.
When was the CZT EENDRACHT 2 A built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.